[etherlab-users] EtherCAT Master via USB-Adapter?

Karl Zeilhofer karl at zeilhofer.co.at
Tue Apr 30 09:49:10 CEST 2019


Dear Mr. Wilhelm,

thanks for your first advices. May I ask, what do you define as "good"
realtime behavior?

Could this "bad" realtime performanc be improved by using a USB-adapter
with a supported chipset? Or does USB (3.0) introduce inherently bad
realtime performance?

Kind regards, Karl Zeilhofer


On 30.04.19 07:47, Dr.-Ing. Wilhelm Hagemeister wrote:
> Hallo Mr Zeilhofer,
>
> generally the EtherCAT master should work with any Ethernet interface
> which is supported by the kernel if one uses the generic driver.
>
> Due to the fact that the generic driver uses parts of the regular
> network stack, don't expect good realtime behavior with an USB connected
> adapter.
>
> Regards Wilhelm
>
> Am 30.04.2019 um 01:40 schrieb Karl Zeilhofer:
>> Hi,
>>
>> has anyone experiences with running the IgH EtherCAT master via a
>> USB-Ethernet adapter?
>> I'm using one on one of my servers, which runs since years without
>> problems. It uses the r8152 Ethernet driver, which is not supported.
>>
>> For the first tests, I don't want to configure my main Ethernet port,
>> which is an e1000e, on my daily working machine.
>> As far as I understood from the documentation, that Ethernet port cannot
>> be used for the daily network traffic any more, right?
>>
>> If it would generally work over USB, I would buy a new adapter with one
>> of the supported chip sets. Any recommendations?
>>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
-- 
*Mechatronik* 	  	  	  	  	  	 
*Karl Zeilhofer* 	| 	Wengstraße 58 	| 	4643 Pettenbach 	| 	Austria
*www.zeilhofer.co.at <http://www.zeilhofer.co.at/>* 	|
karl at zeilhofer.co.at 	| 	+43 660 6591574 	| 	*UID:*ATU64031657

------------------------------------------------------------------------

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20190430/752384ce/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20190430/752384ce/attachment-0004.sig>


More information about the Etherlab-users mailing list