[etherlab-users] Debian Stretch

[Jeong Han Lee]

Hi Steven,

    The following repo may help you to find your own solution.

    https://github.com/icshwi/etherlabmaster

    HTH,
    Han


On 1/4/19 6:21 PM, Steve Hartmann wrote:
> We have been using etherLabs etherCAT stack on Debian Wheezy with a 
> Xenomai kernel for some time now.  For reasons outside of ethercat we 
> want to move to Stretch (Debian 9) using the RT_PREEMPT kernel.  I have 
> the stack up and running, but some system differences are causing me 
> some difficulties.  I have been reading articles, but was wanting to 
> know if someone here has already gone through the pain and would be 
> willing to share their work.
> 
> First of all, I have found that although the UDev directories are still 
> there, they are all empty and UDev seems to be deprecated.  The UDev 
> rule, 99-EtherCAT.rules, which contains the line 
> “KERNEL=="EtherCAT[0-9]*", MODE="0664"” no longer seems to have any 
> effect.  Anyone know the new procedure to set the file mode for the 
> EtherCAT devices?
> 
> Second, they have switched to systemd.  I have just been running the 
> sbin/ethercatctl script to start and stop the service.  Anyone know the 
> magic mojo to add it to the system so I can use systemctrl and thus be 
> able to have it start on system startup?
> 
> TIA,
> 
> Steven
> 
> 
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
> 

-- 
Jeong Han Lee, Dr.rer.nat.

Integrated Control System Division

European Spallation Source ERIC
P.O Box 176, SE-221 00 Lund, Sweden
Visiting address: Odarslövsvägen 113, Lund

Mobile: +46 (0)721 79 24 09
Phone: +46 (0)46 888 34 09
E-mail: han.lee at esss.se