[Etherlab-users] [etherlab-users] DLS stops the etherCAT process

[Daniel Lemus]

Hi

I have been using DLS quite a lot without issues (I was using revision 872). Lately when I try to use the dls_ctl to log data from a running process the process is stopped once I start the Job in dls_ctl. These are the steps I am following

1. Start ethercat process
2. Run dls_ctl
3. Configure new job using 127.0.0.1 as source
4. Slect signals
5. Press start

Once I do this the process is stopped. I have tried reinstalling the dls with the current revision but I still get the same issue. I have also tried a second computer with similar configuration and get the same issue.

Checking the journalctl -xe I get

ul 10 14:04:37 linux-nvm6 dlsd_logger[30929]: INFO: PdCom: Requesting channel list.
Jul 10 14:04:37 linux-nvm6 dlsd_logger[30929]: [4.1K blob data]
Jul 10 14:04:37 linux-nvm6 dlsd_logger[30929]: INFO: Finishing job...
Jul 10 14:04:37 linux-nvm6 dlsd_logger[30929]: INFO: Job finished without errors.
Jul 10 14:04:37 linux-nvm6 dlsd_logger[30929]: INFO: ----- Logging process finished. Exiting with ERROR! (Code -2) -----
Jul 10 14:04:37 linux-nvm6 dlsd_mother[25644]: INFO: Process for job (110) sadfsadf with PID 30929 exited with code -2. Restarting in 30 s.

Any ideas??

Daniel