[Etherlab-users] Paho MQTT in C for communication

Brumand-Poor, Faras faras.brumand at ifas.rwth-aachen.de
Wed Apr 28 18:53:33 CEST 2021

Hallo Wilhelm hallo Florian,

@Wilhelm:  I will look at the README and check out the cpp-example.

@Florian: I don't know PdServ. What is it used for?

Is there is a specific benefit from implementing the MQTT interface in PdServ like performance-wise?

Best Regards,


Von: Etherlab-users <etherlab-users-bounces at etherlab.org> im Auftrag von Florian Pose <fp at igh.de>
Gesendet: Mittwoch, 28. April 2021 18:12:46
An: Dr.-Ing. Wilhelm Hagemeister
Cc: etherlab-users at etherlab.org
Betreff: Re: [Etherlab-users] Paho MQTT in C for communication

On Wed, Apr 28, 2021 at 05:40:20PM +0200, Dr.-Ing. Wilhelm Hagemeister wrote:
> I suggest you run your MQTT software in a different program and transfer
> your data between the MQTT program and the real time EtherLab process with
> "rtipc":

Even better would be implementing an MQTT interface in PdServ. ;-)

Best regards,

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20210428/397cc8ca/attachment.htm>

More information about the Etherlab-users mailing list