[Etherlab-users] [Unofficial patchset] Unable to use realtime Master#1 in Xenomai 3

[HoThanhtam]

Hello 
I am using unofficial patchset to be able to use the EtherCAT master code in Xenomai 3. I enabled 2 masters on 2 NIC ports. I built an application using libethercat_rtdm, this application work fine if I conrtol slave via Master#0. However when I switch to Master#1 ( ecrt_request_master(1) ) then I got the error "Failed to open /dev/rtdm/EtherCAT1: No such device or address" althought both /dev/rtdm/EtherCAT0 and /dev/rtdm/EtherCAT1 exist. 
By the way, this application worked well on Xenomai 2 system, on both Master#0 and Master#1.
Any advise?
Thank you.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.etherlab.org/pipermail/etherlab-users/attachments/20210826/ec77da4d/attachment.htm>