[Etherlab-users] Estun EE-R0: Invalid input configuration

Richard Hacker ha at igh.de
Wed Mar 3 00:04:31 CET 2021


Hi Dirk

You made a mistake configuring the TxPdo's. You need to read the docs, 
and maybe the ESI (BTW I couldn't find it from your link)

What is your configuration?
$ ethercat config

Have you tried
$ ethercat cstruct
as a starting point?

Does the drive require distributed clocks?

Richard

On 2021-03-02 19:04, Eibach, Dirk wrote:
> I am trying to get a Estun EE-R00 IO-Module working. It works fine with an Acontis EtherCAT master. After it has been operational on the Acontis master I plug it to the Etherlab master. The PDO configurations looks allright:
> root at rosie:/home/dirk# ethercat pdos
> SM0: PhysAddr 0x1000, DefaultSize  128, ControlRegister 0x26, Enable 1
> SM1: PhysAddr 0x1400, DefaultSize  128, ControlRegister 0x22, Enable 1
> SM2: PhysAddr 0x1800, DefaultSize    2, ControlRegister 0x64, Enable 1
>    RxPDO 0x1608 ""
>      PDO entry 0x7080:02, 16 bit, ""
>    RxPDO 0x1609 ""
>      PDO entry 0x7090:02, 16 bit, ""
> SM3: PhysAddr 0x1c00, DefaultSize    6, ControlRegister 0x20, Enable 1
>    TxPDO 0x1a00 ""
>      PDO entry 0x6000:02, 16 bit, ""
>    TxPDO 0x1a01 ""
>      PDO entry 0x6010:02, 16 bit, ""
>    TxPDO 0x1a02 ""
>      PDO entry 0x6020:05, 16 bit, ""
>      PDO entry 0x6020:06, 16 bit, ""
>      PDO entry 0x6020:07, 16 bit, ""
>      PDO entry 0x6020:08, 16 bit, ""
> 
> This is exactly what I have configured in the Acontis master(and matches the IO-modules that are installed), so thumbs up.
> 
> Then I try setting it to operational:
> root at rosie:/home/dirk# ethercat state SAFEOP root at rosie:/home/dirk# dmesg -c [ 8413.398250] EtherCAT DEBUG 0-0: Changing state from PREOP to SAFEOP.
> [ 8413.398254] EtherCAT DEBUG 0-0: Configuring...
> [ 8413.398880] EtherCAT DEBUG 0-0: Now in INIT.
> [ 8413.398882] EtherCAT DEBUG 0-0: Clearing FMMU configurations...
> [ 8413.399125] EtherCAT DEBUG 0-0: Clearing sync manager configurations...
> [ 8413.399372] EtherCAT DEBUG 0-0: Clearing DC assignment...
> [ 8413.399615] EtherCAT DEBUG 0-0: Configuring mailbox sync managers...
> [ 8413.399619] EtherCAT DEBUG 0-0: SM0: Addr 0x1000, Size 128, Ctrl 0x26, En 1 [ 8413.399622] EtherCAT DEBUG 0-0: SM1: Addr 0x1400, Size 128, Ctrl 0x22, En 1 [ 8413.399858] EtherCAT DEBUG 0-0: Assigning SII access to PDI.
> [ 8413.400773] EtherCAT DEBUG 0-0: Now in PREOP.
> [ 8413.400775] EtherCAT DEBUG 0-0: Assigning SII access back to EtherCAT.
> [ 8413.401020] EtherCAT DEBUG 0-0: SM2: Addr 0x1800, Size   2, Ctrl 0x64, En 1
> [ 8413.401023] EtherCAT DEBUG 0-0: SM3: Addr 0x1C00, Size   6, Ctrl 0x20, En 1
> [ 8413.402490] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR).
> [ 8413.402734] EtherCAT ERROR 0-0: AL status message 0x001E: "Invalid input configuration".
> [ 8413.404203] EtherCAT 0-0: Acknowledged state PREOP.
> 
> I have no idea why this happens. Before I start throwing wireshark at this I wanted to make sure I am not missing something basic. Ideas anybody?
> You can download the ESI-file for the slave here: https://cloud.cloos.de/sharing/op1jvp1q8
> 
> Sitz der Firma/Headquarters: 35708, Germany
> Amtsgericht/Lower district court: Wetzlar HR B 3052
> Geschäftsführer/Managing Director: Sieghard Thomas
> 

Mit freundlichem Gruß

Richard Hacker

-- 
------------------------------------------------------------------------

Richard Hacker M.Sc.
richard.hacker at igh.de
Tel.: +49 201 / 36014-16

Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Nordsternstraße 66
D-45329 Essen

Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschäftsführung:
- Dr.-Ing. Siegfried Rotthäuser
- Dr. Sven Beermann, Prokurist
Tel.: +49 201 / 360-14-0
http://www.igh.de

------------------------------------------------------------------------


More information about the Etherlab-users mailing list