[Etherlab-users] Received upload response for wrong SDO
Gavin Lambert
gavin.lambert at tomra.com
Mon Sep 20 01:21:50 CEST 2021
It’s most likely a dangling response from the previous run not collected.
Try using the unofficial patchset; it includes a step to flush the mailbox when reinitializing the slaves. https://sourceforge.net/u/uecasm/etherlab-patches/ci/default/tree/
Gavin Lambert
Senior Software Developer TOMRA Fresh Food
[cid:TOMRAFresh_final_size_times_two_2_99d242b2-ba06-4c25-ab26-020cca7ee6dd.png]
[cid:TF-FB-icon_b77c57e4-4990-4f9d-b3a2-8e6ab45df7f2.jpg] <https://www.facebook.com/TOMRAFreshFood> [cid:TF-LinkedIn-icon_d54c4829-dcb9-450c-9187-34b26e85ebaa.jpg] <https://www.linkedin.com/company/tomra-fresh-food/> [cid:TOMRA-Vimeo_4673038e-313a-491f-b3a4-0b39ace6df88.jpg] <https://vimeo.com/tomrafreshfood> [cid:TOMRAinstagram_45b30c55-490a-4f32-8fd3-998c152e3494.jpg] <https://www.instagram.com/tomrafood/>
Compac Technologies Ltd | 4 Henderson Place | PO Box 13 516 | Onehunga 1061 | New Zealand
Phone: +64 96 34 00 88 | https://www.compacsort.com
The information contained in this communication and any attachment is confidential and may be legally privileged. It should only be read by the person(s) to whom it is addressed. If you have received this communication in error, please notify the sender and delete the communication.
From: 三倍杜老爺
Sent: Saturday, 18 September 2021 1:50 am
To: etherlab-users at etherlab.org
Subject: [Etherlab-users] Received upload response for wrong SDO
Hello everyone,
There is a wired problem in my controller and Panasonic driver.
If the parameter of driver is not modified, there is no problem with Ethercat connection. But when it running more than 1 slaves which feed constant(0x6092) are modified, error will occur in the second time of connection.
There is no problem in first time connection after reboot controller and slaves, but if I only reboot controller in this moment, there is error. That is the reason I said “the second time of connection”.
Here is the log when occur the error. I think this
[ 12.814985] EtherCAT ERROR 0-1: Received upload response for wrong SDO (0x1001:00, requested: 0x1C12:00).
maybe is the main error of the problem of connection.
Because it is the first error in log and it doesn’t appear in first connection.
And after this log
[ 33.959979] EtherCAT: Requesting master 0...
my program is started.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.26 (felix at C006) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #1 Wed Jul 12 11:26:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: TI AM335x BeagleBone
[ 0.000000] cma: CMA: reserved 24 MiB at 9d800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] free_area_init_node: node 0, pgdat c090f7e8, node_mem_map df9ee000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (neon )
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
[ 0.000000] Kernel command line: console=ttyO1,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 483208K/522240K available (6435K kernel code, 326K rwdata, 2212K rodata, 274K init, 499K bss, 39032K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc087a0a4 (8649 kB)
.init : 0xc087b000 - 0xc08bfa54 ( 275 kB)
.data : 0xc08c0000 - 0xc0911a80 ( 327 kB)
.bss : 0xc0911a80 - 0xc098e760 ( 500 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000013] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.000032] I-pipe, 24.000 MHz clocksource, wrap in 178956 ms
[ 0.000062] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000523] Interrupt pipeline (release #8)
[ 0.000800] Console: colour dummy device 80x30
[ 0.000834] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[ 0.089453] pid_max: default: 32768 minimum: 301
[ 0.089554] Security Framework initialized
[ 0.089612] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.089624] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.096473] CPU: Testing write buffer coherency: ok
[ 0.096858] Setting up static identity map for 0x8064f188 - 0x8064f1e0
[ 0.098092] devtmpfs: initialized
[ 0.100096] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.108489] omap_hwmod: tptc0 using broken dt data from edma
[ 0.108585] omap_hwmod: tptc1 using broken dt data from edma
[ 0.108671] omap_hwmod: tptc2 using broken dt data from edma
[ 0.113038] omap_hwmod: debugss: _wait_target_disable failed
[ 0.168426] pinctrl core: initialized pinctrl subsystem
[ 0.169576] regulator-dummy: no parameters
[ 0.171845] NET: Registered protocol family 16
[ 0.173944] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.183476] syscon 44e10000.control_module: regmap [mem 0x44e10000-0x44e107fb] registered
[ 0.185063] platform 49000000.edma: alias fck already exists
[ 0.185088] platform 49000000.edma: alias fck already exists
[ 0.185103] platform 49000000.edma: alias fck already exists
[ 0.185994] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.186307] OMAP GPIO hardware version 0.1
[ 0.187222] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.188295] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.189393] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.199251] No ATAGs?
[ 0.199273] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.230222] bio: create slab <bio-0> at 0
[ 0.246905] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.247599] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator at 0[0]'
[ 0.247902] vmmcsd_fixed: 3300 mV
[ 0.250918] vgaarb: loaded
[ 0.251472] i2c-core: driver [palmas] using legacy suspend method
[ 0.251484] i2c-core: driver [palmas] using legacy resume method
[ 0.252256] SCSI subsystem initialized
[ 0.252828] libata version 3.00 loaded.
[ 0.253849] usbcore: registered new interface driver usbfs
[ 0.254049] usbcore: registered new interface driver hub
[ 0.254260] usbcore: registered new device driver usb
[ 0.255269] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux at 44e10800/pinmux_i2c0_pins, deferring probe
[ 0.255299] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral
[ 0.255686] pps_core: LinuxPPS API ver. 1 registered
[ 0.255697] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it<mailto:giometti at linux.it>>
[ 0.255837] PTP clock support registered
[ 0.257919] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 0.258775] Advanced Linux Sound Architecture Driver Initialized.
[ 0.260564] cfg80211: Calling CRDA to update world regulatory domain
[ 0.261508] Switched to clocksource ipipe_tsc
[ 0.282662] NET: Registered protocol family 2
[ 0.283490] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.283541] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.283588] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.283656] TCP: reno registered
[ 0.283679] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.283698] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.283897] NET: Registered protocol family 1
[ 0.284296] RPC: Registered named UNIX socket transport module.
[ 0.284307] RPC: Registered udp transport module.
[ 0.284313] RPC: Registered tcp transport module.
[ 0.284320] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.284335] PCI: CLS 0 bytes, default 64
[ 0.285404] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.288177] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.463664] I-pipe: head domain Xenomai registered.
[ 0.463700] Xenomai: hal/arm started.
[ 0.464945] Xenomai: scheduling class idle registered.
[ 0.464968] Xenomai: scheduling class rt registered.
[ 0.473453] Xenomai: real-time nucleus v2.6.5 (Lost in a Memory) loaded.
[ 0.473465] Xenomai: debug mode enabled.
[ 0.473939] Xenomai: starting native API services.
[ 0.473952] Xenomai: starting POSIX services.
[ 0.474111] Xenomai: starting RTDM services.
[ 0.474914] VFS: Disk quotas dquot_6.5.2
[ 0.474981] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.475532] NFS: Registering the id_resolver key type
[ 0.475611] Key type id_resolver registered
[ 0.475620] Key type id_legacy registered
[ 0.475660] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.475850] msgmni has been set to 991
[ 0.477485] NET: Registered protocol family 38
[ 0.477530] io scheduler noop registered
[ 0.477539] io scheduler deadline registered
[ 0.477561] io scheduler cfq registered (default)
[ 0.479199] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.484308] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.487351] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 44e09000[0]'
[ 0.487391] omap_uart 44e09000.serial: no wakeirq for uart0
[ 0.487405] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 44e09000[0]'
[ 0.487552] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[ 0.488246] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 48022000[0]'
[ 0.488275] omap_uart 48022000.serial: no wakeirq for uart0
[ 0.488287] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial at 48022000[0]'
[ 0.488405] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[ 1.195547] console [ttyO1] enabled
[ 1.200618] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[ 1.208031] [drm] Initialized drm 1.1.0 20060810
[ 1.224306] brd: module loaded
[ 1.233612] loop: module loaded
[ 1.237445] (hci_tty): inside hci_tty_init
[ 1.242302] (hci_tty): allocated 249, 0
[ 1.250197] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.260405] usbcore: registered new interface driver asix
[ 1.266356] usbcore: registered new interface driver ax88179_178a
[ 1.272966] usbcore: registered new interface driver cdc_ether
[ 1.279303] usbcore: registered new interface driver smsc95xx
[ 1.285503] usbcore: registered new interface driver net1080
[ 1.291664] usbcore: registered new interface driver cdc_subset
[ 1.298017] usbcore: registered new interface driver zaurus
[ 1.304137] usbcore: registered new interface driver cdc_ncm
[ 1.310586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.317473] ehci-pci: EHCI PCI platform driver
[ 1.322363] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.328333] usbcore: registered new interface driver cdc_wdm
[ 1.334525] usbcore: registered new interface driver usb-storage
[ 1.342013] mousedev: PS/2 mouse device common for all mice
[ 1.349803] i2c-core: driver [rtc-ds1307] using legacy suspend method
[ 1.356610] i2c-core: driver [rtc-ds1307] using legacy resume method
[ 1.364133] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 1.371675] 44e3e000.rtc: already running
[ 1.376687] i2c /dev entries driver
[ 1.380517] Driver for 1-wire Dallas network protocol.
[ 1.388320] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.396879] of_get_named_gpiod_flags exited with status 0
[ 1.396896] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 48060000[0]'
[ 1.431694] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 481d8000[0]'
[ 1.431713] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc at 481d8000[0]'
[ 1.472255] of_get_named_gpiod_flags exited with status 0
[ 1.472278] of_get_named_gpiod_flags exited with status 0
[ 1.472291] of_get_named_gpiod_flags exited with status 0
[ 1.472303] of_get_named_gpiod_flags exited with status 0
[ 1.472317] of_get_named_gpiod_flags exited with status 0
[ 1.472727] of_get_named_gpiod_flags exited with status 0
[ 1.476269] of_get_named_gpiod_flags exited with status 0
[ 1.476667] of_get_named_gpiod_flags exited with status 0
[ 1.477693] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.484532] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 1.492104] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 1.502917] usbcore: registered new interface driver usbhid
[ 1.508772] usbhid: USB HID core driver
[ 1.513100] platform 44d00000.wkup_m3: Driver wkup_m3 requests probe deferral
[ 1.524272] oprofile: using arm/armv7
[ 1.528421] TCP: cubic registered
[ 1.531973] Initializing XFRM netlink socket
[ 1.536554] mmc1: BKOPS_EN bit is not set
[ 1.540862] NET: Registered protocol family 17
[ 1.545632] NET: Registered protocol family 15
[ 1.550455] Key type dns_resolver registered
[ 1.556340] PM: Voltage scaling data blob not provided from DT.
[ 1.562900] PM: bootloader does not support rtc-only!
[ 1.568253] ThumbEE CPU extension supported.
[ 1.572837] mmc1: new high speed MMC card at address 0001
[ 1.578838] Registering SWP/SWPB emulation handler
[ 1.584325] mmcblk0: mmc1:0001 P1XXXX 3.60 GiB
[ 1.590101] mmcblk0boot0: mmc1:0001 P1XXXX partition 1 2.00 MiB
[ 1.597006] regulator-dummy: disabling
[ 1.602605] mmcblk0boot1: mmc1:0001 P1XXXX partition 2 2.00 MiB
[ 1.611247] mmcblk0: p1 p2
[ 1.618231] mmcblk0boot1: unknown partition table
[ 1.625157] DCDC1: at 1500 mV
[ 1.628728] mmcblk0boot0: unknown partition table
[ 1.636554] vdd_mpu: 925 <--> 1325 mV at 1275 mV
[ 1.644377] vdd_core: 925 <--> 1150 mV at 1125 mV
[ 1.652222] LDO1: at 1800 mV
[ 1.658124] LDO2: at 3300 mV
[ 1.663981] LDO3: 1800 mV
[ 1.669564] LDO4: at 3300 mV
[ 1.674542] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 1.680754] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 1.688108] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 100 kHz
[ 1.694582] remoteproc0: wkup_m3 is available
[ 1.699252] remoteproc0: Note: remoteproc is still under development and considered experimental.
[ 1.708699] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 1.719717] remoteproc0: Direct firmware load failed with error -2
[ 1.726322] remoteproc0: Falling back to user helper
[ 1.732872] omap_rtc 44e3e000.rtc: setting system clock to 2017-08-17 02:55:56 UTC (1502938556)
[ 1.745520] ALSA device list:
[ 1.748653] No soundcards found.
[ 1.762465] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.771027] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.778956] devtmpfs: mounted
[ 1.782463] Freeing unused kernel memory: 272K (c087b000 - c08bf000)
[ 1.934431] random: systemd urandom read with 36 bits of entropy available
[ 1.943309] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 1.957677] systemd[1]: Detected architecture 'arm'.
[ 2.014393] systemd[1]: Failed to insert module 'autofs4'
[ 2.020251] systemd[1]: Failed to insert module 'ipv6'
[ 2.027106] systemd[1]: Set hostname to <arm>.
[ 2.351821] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 2.370753] systemd[1]: Expecting device dev-ttyO1.device...
[ 2.391773] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.400120] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.408226] systemd[1]: Starting Remote File Systems (Pre).
[ 2.431679] systemd[1]: Reached target Remote File Systems (Pre).
[ 2.438350] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.447768] systemd[1]: Failed to open /dev/autofs: No such file or directory
[ 2.455325] systemd[1]: Failed to initialize automounter: No such file or directory
[ 2.501663] systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.512521] systemd[1]: Unit proc-sys-fs-binfmt_misc.automount entered failed state.
[ 2.520772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.529477] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.537910] systemd[1]: Starting Paths.
[ 2.561665] systemd[1]: Reached target Paths.
[ 2.566334] systemd[1]: Starting Encrypted Volumes.
[ 2.591652] systemd[1]: Reached target Encrypted Volumes.
[ 2.597437] systemd[1]: Starting Swap.
[ 2.621650] systemd[1]: Reached target Swap.
[ 2.626231] systemd[1]: Starting Root Slice.
[ 2.651657] systemd[1]: Created slice Root Slice.
[ 2.656692] systemd[1]: Starting User and Session Slice.
[ 2.681667] systemd[1]: Created slice User and Session Slice.
[ 2.687802] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.711679] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.717817] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.741657] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.749066] systemd[1]: Starting Journal Socket (/dev/log).
[ 2.771666] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.778034] systemd[1]: Starting udev Control Socket.
[ 2.801669] systemd[1]: Listening on udev Control Socket.
[ 2.807473] systemd[1]: Starting udev Kernel Socket.
[ 2.831671] systemd[1]: Listening on udev Kernel Socket.
[ 2.837390] systemd[1]: Starting Journal Socket.
[ 2.861677] systemd[1]: Listening on Journal Socket.
[ 2.867116] systemd[1]: Starting System Slice.
[ 2.891678] systemd[1]: Created slice System Slice.
[ 2.897004] systemd[1]: Starting File System Check on Root Device...
[ 2.923848] systemd[1]: Starting system-getty.slice.
[ 2.951797] systemd[1]: Created slice system-getty.slice.
[ 2.958664] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 2.970965] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 2.982560] systemd[1]: Starting Increase datagram queue length...
[ 2.993495] systemd[1]: Mounted Huge Pages File System.
[ 3.000833] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.018230] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.040730] systemd[1]: Mounting Debug File System...
[ 3.096542] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.129159] systemd[1]: Starting Load Kernel Modules...
[ 3.142390] systemd[1]: Starting udev Coldplug all Devices...
[ 3.155885] systemd[1]: Starting Slices.
[ 3.201884] systemd[1]: Reached target Slices.
[ 3.221844] systemd[1]: Mounted Debug File System.
[ 3.241842] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.271830] systemd[1]: Started File System Check on Root Device.
[ 3.301840] systemd[1]: Started Increase datagram queue length.
[ 3.331725] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.361739] systemd[1]: Started Load Kernel Modules.
[ 3.529772] systemd[1]: Mounted FUSE Control File System.
[ 3.537613] systemd[1]: Starting Apply Kernel Variables...
[ 3.564563] systemd[1]: Mounted Configuration File System.
[ 3.570822] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.614232] systemd[1]: Starting Syslog Socket.
[ 3.631904] systemd[1]: Listening on Syslog Socket.
[ 3.637260] systemd[1]: Starting Journal Service...
[ 3.691937] systemd[1]: Started Journal Service.
[ 3.808892] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 4.018357] systemd-udevd[1458]: starting version 215
[ 4.298055] systemd-journald[1384]: Received request to flush runtime journal from PID 1
[ 4.494168] remoteproc0: powering up wkup_m3
[ 4.499434] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 154412
[ 4.595531] PM: CM3 Firmware Version = 0x190
[ 4.600095] remoteproc0: remote processor wkup_m3 is now up
[ 4.702327] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/usb at 47400000/usb-phy at 47401300[0]'
[ 4.702408] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 4.772304] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/usb at 47400000/usb-phy at 47401b00[0]'
[ 4.772385] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 5.006287] random: nonblocking pool is initialized
[ 5.968366] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 5.968394] musb-hdrc: MHDRC RTL version 2.0
[ 5.968404] musb-hdrc: setup fifo_mode 4
[ 5.968422] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 5.968547] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[ 6.021929] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
[ 6.076540] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.083772] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.091355] usb usb1: Product: MUSB HDRC host driver
[ 6.096583] usb usb1: Manufacturer: Linux 3.14.26 musb-hcd
[ 6.102354] usb usb1: SerialNumber: musb-hdrc.0.auto
[ 6.132853] hub 1-0:1.0: USB hub found
[ 6.136903] hub 1-0:1.0: 1 port detected
[ 6.151625] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 6.151649] musb-hdrc: MHDRC RTL version 2.0
[ 6.151659] musb-hdrc: setup fifo_mode 4
[ 6.151675] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 6.151808] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 6.170147] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2
[ 6.190237] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.197476] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.205080] usb usb2: Product: MUSB HDRC host driver
[ 6.210290] usb usb2: Manufacturer: Linux 3.14.26 musb-hcd
[ 6.216062] usb usb2: SerialNumber: musb-hdrc.1.auto
[ 6.236913] hub 2-0:1.0: USB hub found
[ 6.244827] hub 2-0:1.0: 1 port detected
[ 7.636001] udc musb-hdrc.0.auto: registering UDC driver [g_multi]
[ 7.701391] EtherCAT: Master driver 1.5.2 unknown
[ 7.728499] using random self ethernet address
[ 7.733300] using random host ethernet address
[ 7.737971] using host ethernet address: EC:24:B8:B7:64:FD
[ 7.743563] using self ethernet address: EC:24:B8:B7:64:F0
[ 7.771921] using random self ethernet address
[ 7.776616] using random host ethernet address
[ 7.781287] using host ethernet address: EC:24:B8:B7:64:FD
[ 7.786915] using self ethernet address: EC:24:B8:B7:64:F0
[ 7.799882] EtherCAT 0: Registering RTDM device EtherCAT.
[ 7.822960] EtherCAT: 1 master waiting for devices.
[ 7.985269] usb0: HOST MAC ec:24:b8:b7:64:fd
[ 7.990445] usb0: MAC ec:24:b8:b7:64:f0
[ 8.138527] userial_init: registered 4 ttyGS* devices
[ 8.182474] Number of LUNs=8
[ 8.185977] Mass Storage Function, version: 2009/09/11
[ 8.229037] LUN: removable file: (no medium)
[ 8.288095] Number of LUNs=1
[ 8.291326] lun0: open backing file: /dev/mmcblk0p1
[ 8.291343] LUN: removable file: /dev/mmcblk0p1
[ 8.296187] Number of LUNs=1
[ 8.299223] g_multi gadget: adding config #1 'Multifunction with RNDIS'/bf09779c
[ 8.321654] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 8.328077] davinci_mdio 4a101000.mdio: detected phy mask fffffff5
[ 8.357423] g_multi gadget: adding 'rndis'/dd4d72c0 to config 'Multifunction with RNDIS'/bf09779c
[ 8.357485] g_multi gadget: adding 'acm'/dd4d7200 to config 'Multifunction with RNDIS'/bf09779c
[ 8.357509] g_multi gadget: acm ttyGS0: dual speed IN/ep3in OUT/ep2out NOTIFY/ep4in
[ 8.374819] g_multi gadget: I/O thread pid: 1812
[ 8.374853] g_multi gadget: adding 'Mass Storage Function'/dbe28480 to config 'Multifunction with RNDIS'/bf09779c
[ 8.374888] g_multi gadget: cfg 1/bf09779c speeds: high full
[ 8.374897] g_multi gadget: interface 0 = rndis/dd4d72c0
[ 8.374906] g_multi gadget: interface 1 = rndis/dd4d72c0
[ 8.374914] g_multi gadget: interface 2 = acm/dd4d7200
[ 8.374922] g_multi gadget: interface 3 = acm/dd4d7200
[ 8.374939] g_multi gadget: interface 4 = Mass Storage Function/dbe28480
[ 8.374991] g_multi gadget: adding config #2 'Multifunction with CDC ECM'/bf097840
[ 8.375130] g_multi gadget: adding 'cdc_ethernet'/dd4d7140 to config 'Multifunction with CDC ECM'/bf097840
[ 8.375162] g_multi gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in
[ 8.375177] g_multi gadget: adding 'acm'/dd4d7080 to config 'Multifunction with CDC ECM'/bf097840
[ 8.375199] g_multi gadget: acm ttyGS0: dual speed IN/ep3in OUT/ep2out NOTIFY/ep4in
[ 8.377776] g_multi gadget: I/O thread pid: 1813
[ 8.377806] g_multi gadget: adding 'Mass Storage Function'/dbe28200 to config 'Multifunction with CDC ECM'/bf097840
[ 8.377837] g_multi gadget: cfg 2/bf097840 speeds: high full
[ 8.377846] g_multi gadget: interface 0 = cdc_ethernet/dd4d7140
[ 8.377855] g_multi gadget: interface 1 = cdc_ethernet/dd4d7140
[ 8.377863] g_multi gadget: interface 2 = acm/dd4d7080
[ 8.377871] g_multi gadget: interface 3 = acm/dd4d7080
[ 8.377879] g_multi gadget: interface 4 = Mass Storage Function/dbe28200
[ 8.377899] g_multi gadget: Multifunction Composite Gadget
[ 8.383772] g_multi gadget: g_multi ready
[ 8.653120] libphy: 4a101000.mdio: probed
[ 8.657412] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver TLK110
[ 8.665833] davinci_mdio 4a101000.mdio: phy[3]: device 4a101000.mdio:03, driver TLK110
[ 8.712128] ec_cpsw 4a100000.ethernet: Detected MACID = ec:24:b8:b7:64:fb
[ 8.736472] g_multi gadget: high-speed config #1: Multifunction with RNDIS
[ 8.743757] usb0: qlen 10
[ 8.743788] g_multi gadget: activate acm ttyGS0
[ 8.743805] g_multi gadget: acm ttyGS0 serial state 0000
[ 8.743835] g_multi gadget: set_config: interface 4 (Mass Storage Function) requested delayed status
[ 8.743843] g_multi gadget: delayed_status count 1
[ 8.744055] g_multi gadget: usb_composite_setup_continue
[ 8.744071] g_multi gadget: usb_composite_setup_continue: Completing delayed status
[ 8.749399] EtherCAT: Accepting EC:24:B8:B7:64:FB as main device for master 0.
[ 8.765667] (null): initializing cpsw version 1.12 (0)
[ 8.863165] (null): phy found : id is : 0x2000a211
[ 8.886893] EtherCAT 0: Starting EtherCAT-IDLE thread.
[ 9.725140] usb0: eth_open
[ 9.725167] usb0: eth_start
[ 11.862199] libphy: 4a101000.mdio:01 - Link is Up - 100/Full
[ 11.868169] EtherCAT 0: Link state of ecm0 changed to UP.
[ 11.881696] EtherCAT 0: 2 slave(s) responding on main device.
[ 11.887758] EtherCAT 0: Slave states on main device: SAFEOP + ERROR.
[ 11.911760] EtherCAT 0: Scanning bus.
[ 11.915695] EtherCAT WARNING 0-0: Slave has state error bit set (SAFEOP + ERROR)!
[ 12.411916] EtherCAT WARNING 0-1: Slave has state error bit set (SAFEOP + ERROR)!
[ 12.814985] EtherCAT ERROR 0-1: Received upload response for wrong SDO (0x1001:00, requested: 0x1C12:00).
[ 12.825104] EtherCAT DEBUG: 00 30 4F 01 10 00 10 00 00 00
[ 12.912056] EtherCAT 0: Bus scanning completed in 1020 ms.
[ 12.917841] EtherCAT 0: Using slave 0 as DC reference clock.
[ 12.923838] EtherCAT ERROR 0: Failed to calculate bus topology.
[ 12.951774] EtherCAT ERROR 0-0: AL status message 0x001B: "Sync manager watchdog".
[ 12.971763] EtherCAT 0-0: Acknowledged state SAFEOP.
[ 13.001807] EtherCAT ERROR 0-1: AL status message 0x001B: "Sync manager watchdog".
[ 18.021584] EtherCAT ERROR 0-1: Timeout while acknowledging state SAFEOP + ERROR.
[ 18.029463] EtherCAT ERROR 0-1: Failed to acknowledge state change.
[ 33.959979] EtherCAT: Requesting master 0...
[ 33.964543] EtherCAT: Successfully requested master 0.
[ 34.486799] EtherCAT ERROR 0-0: Reception of CoE SDO description request failed: No response.
[ 34.510722] EtherCAT 0: Slave states on main device: PREOP, SAFEOP + ERROR.
[ 34.538630] EtherCAT WARNING 0-0: CoE Emergency Request received:
Error code 0xA000, Error register 0x10, data:
[ 34.550732] EtherCAT DEBUG: 08 06 00 06 00
[ 34.552021] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR).
[ 34.562578] EtherCAT ERROR 0-0: AL status message 0x001D: "Invalid output configuration".
[ 34.574697] EtherCAT 0-0: Acknowledged state PREOP.
[ 34.582233] EtherCAT ERROR 0-1: AL status message 0x001B: "Sync manager watchdog".
[ 34.594618] EtherCAT 0-1: Acknowledged state SAFEOP.
[ 34.617360] EtherCAT ERROR 0-1: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR).
[ 34.627834] EtherCAT ERROR 0-1: AL status message 0x001D: "Invalid output configuration".
[ 34.640617] EtherCAT 0-1: Acknowledged state PREOP.
[ 34.651587] EtherCAT 0: Slave states on main device: PREOP.
[ 35.521551] EtherCAT ERROR 0-0: Timeout after 1000 ms while waiting for SDO 0x100a:0 upload response.
[ 35.531242] EtherCAT ERROR 0-0: Failed to process SDO request.
[ 35.871551] EtherCAT ERROR 0-0: SDO upload 0x1011:01 aborted.
[ 35.877602] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory".
[ 35.888578] EtherCAT ERROR 0-0: Failed to process SDO request.
[ 35.931556] EtherCAT WARNING 0-1: CoE Emergency Request received:
Error code 0xA000, Error register 0x10, data:
[ 35.943648] EtherCAT DEBUG: 08 06 00 06 00
[ 36.281549] EtherCAT ERROR 0-1: SDO upload 0x1011:01 aborted.
[ 36.287598] EtherCAT ERROR 0-1: SDO abort message 0x06020000: "This object does not exist in the object directory".
[ 36.298582] EtherCAT ERROR 0-1: Failed to process SDO request.
[ 38.421328] EtherCAT ERROR 0-1: Received unknown response while uploading SDO 0x607D:02.
[ 38.429877] EtherCAT DEBUG: 00 80 82 00 05 00 01 00 00 10 01 10 08 10 09 10
[ 38.429912] EtherCAT DEBUG: 0A 10 10 10 18 10 F3 10 00 16 01 16 02 16 03 16
[ 38.429942] EtherCAT DEBUG: 00 1A 01 1A 02 1A 03 1A 00 1C 12 1C 13 1C 32 1C
[ 38.429971] EtherCAT DEBUG: 33 1C 00 30 01 30 02 30 03 30 04 30 08 30 09 30
[ 38.430000] EtherCAT DEBUG: 10 30 11 30 12 30 13 30 14 30 15 30 16 30 17 30
[ 38.430029] EtherCAT DEBUG: 18 30 00 31 01 31 02 31 03 31 04 31 05 31 06 31
[ 38.430058] EtherCAT DEBUG: 07 31 08 31 09 31 10 31 11 31 12 31 13 31 14 31
[ 38.430087] EtherCAT DEBUG: 15 31 16 31 17 31 18 31 19 31 20 31 21 31 22 31
[ 38.430117] EtherCAT DEBUG: 23 31 24 31 25 31 26 31 27 31 28 31 29 31 30 31
[ 38.430146] EtherCAT DEBUG: 31 31 32 31 33 31 34 31 35 31 36 31 37 31 38 31
[ 38.430175] EtherCAT DEBUG: 39 31 40 31 41 31 42 31 43 31 44 31 45 31 46 31
[ 38.430203] EtherCAT DEBUG: 47 31 48 31 49 31 50 31 51 31 52 31 53 31 54 31
[ 38.430233] EtherCAT DEBUG: 55 31 56 31 57 31 58 31 59 31 60 31 61 31 62 31
[ 38.430262] EtherCAT DEBUG: 63 31 64 31 65 31 66 31 67 31 68 31 69 31 70 31
[ 38.430290] EtherCAT DEBUG: 71 31 72 31 73 31 74 31 75 31 76 31 77 31 78 31
[ 38.430320] EtherCAT DEBUG: 00 32 01 32 02 32 03 32 04 32
[ 38.430344] EtherCAT ERROR 0-1: Failed to process SDO request.
[ 38.597665] EtherCAT ERROR 0-1: Reception of CoE dictionary response failed: No response.
[ 39.216146] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 2.
[ 39.225558] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LWR at dd63878c.
[ 39.235902] EtherCAT 0: Domain1: Logical address 0x0000000c, 20 byte, expected working counter 2.
[ 39.245222] EtherCAT 0: Datagram domain1-12-main: Logical offset 0x0000000c, 20 byte, type LRD at dd3fe6cc.
[ 39.259847] EtherCAT 0: Master thread exited.
[ 39.264534] EtherCAT 0: Starting EtherCAT-OP thread.
[ 39.670052] EtherCAT 0: Domain 0: Working counter changed to 1/2.
[ 39.796065] EtherCAT 0: Domain 1: Working counter changed to 1/2.
[ 45.095155] EtherCAT WARNING 0-1: Slave did not sync after 5000 ms.
[ 45.121159] EtherCAT 0: Domain 0: Working counter changed to 2/2.
[ 50.113269] EtherCAT ERROR 0-1: Timeout while setting state SAFEOP.
[ 50.131592] EtherCAT 0: Slave states on main device: PREOP, OP.
Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20210919/69a76316/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TOMRAFresh_final_size_times_two_2_99d242b2-ba06-4c25-ab26-020cca7ee6dd.png
Type: image/png
Size: 13399 bytes
Desc: TOMRAFresh_final_size_times_two_2_99d242b2-ba06-4c25-ab26-020cca7ee6dd.png
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20210919/69a76316/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TF-FB-icon_b77c57e4-4990-4f9d-b3a2-8e6ab45df7f2.jpg
Type: image/jpeg
Size: 10123 bytes
Desc: TF-FB-icon_b77c57e4-4990-4f9d-b3a2-8e6ab45df7f2.jpg
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20210919/69a76316/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TF-LinkedIn-icon_d54c4829-dcb9-450c-9187-34b26e85ebaa.jpg
Type: image/jpeg
Size: 10214 bytes
Desc: TF-LinkedIn-icon_d54c4829-dcb9-450c-9187-34b26e85ebaa.jpg
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20210919/69a76316/attachment-0005.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TOMRA-Vimeo_4673038e-313a-491f-b3a4-0b39ace6df88.jpg
Type: image/jpeg
Size: 1540 bytes
Desc: TOMRA-Vimeo_4673038e-313a-491f-b3a4-0b39ace6df88.jpg
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20210919/69a76316/attachment-0006.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TOMRAinstagram_45b30c55-490a-4f32-8fd3-998c152e3494.jpg
Type: image/jpeg
Size: 10303 bytes
Desc: TOMRAinstagram_45b30c55-490a-4f32-8fd3-998c152e3494.jpg
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20210919/69a76316/attachment-0007.jpg>
More information about the Etherlab-users
mailing list