[Etherlab-users] Looking for etherLAB supported drives

[Sebastien BLANCHET]

Hi,

My company uses Kollmorgen AKD (1st generation) servo drives with IgH 
EtherCAT Master since 2014. (We have not yet tested the 2nd generation 
but they probably should work too).

I have experience only with Kollmorgen drives, but I think that
most servo drives with a Can over EtherCAT (CoE) interface should work 
with IgH EtherCAT Master.

According to the documentation IgH EtherCAT Master supports also Servo 
Profile over EtherCAT (SoE), but I have never tried.

Finally, the situation is:
- most servo drives should work with IgH EtherCAT Master
- unfortunately most servo drives manufacturers support officially only 
TwinCAT, so the integration is not seamless
- you can paid an external company like IgH to have a technical 
assistance for your servo drives.

-- 
Sebastien BLANCHET


On 7/12/22 08:04, Raz wrote:
> Hello
> I am looking for a drive that supports etherLAB. I tested some drives, 
> and not all support etherLAB (ex Elmo).
> Maximum Supply Voltage: 57V  ( 48V Nomnal )
> Max Input current 70Amp.
> 
> 
> Kind regards
> Raz
>