[Etherlab-users] Problem with running the generated code of a Simulink model

[Richard Hacker]

Tell us a bit about your setup:
Matlab/Simulink version
etherlab version

Maybe you want to share your Simulink model with us. I can load up to 
R2018a, so export it to that version if you are running a later version 
of simulink.

On 3/6/23 10:38, Henrik Barie wrote:
> Hello,
> 
> 
> Thank you for your help. I had set my cycle time (I guess its the Fixed 
> Step size(fundamental sample time)?) to 0.01 and now set it to 0.001, 
> however the runtime failure still remains. For the solver I have tried 
> discrete and ode1(Euler) but nothing changed. My stop time is infinite.
> 
> I have installed the Debian Live with Etherlab and Realtime-Kernel 
> preinstalled that you have sent me. Its running on a virtual machine on 
> Oracle VM.
> 
> 
> What else could cause this runtime failure?
> 
> Is the userspace executable the file with the same name as the model but 
> without an ending?
> 
> 
> 
> Kind Regards
> Henrik

Mit freundlichem Gruß

Richard Hacker

-- 
------------------------------------------------------------------------

Richard Hacker M.Sc.
richard.hacker at igh.de
Tel.: +49 201 / 36014-16

Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Nordsternstraße 66
D-45329 Essen

Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschäftsführung:
- Dr.-Ing. Siegfried Rotthäuser
- Dr. Sven Beermann, Prokurist
Tel.: +49 201 / 360-14-0
http://www.igh.de

------------------------------------------------------------------------