[etherlab-dev] sync manager problem

Christian Gieseler chg at alpenjodel.de
Tue Dec 9 14:14:26 CET 2008


Hi Florian,

i found my (newbie-)mistakes.
As the mini example started the numbering of the slaves with 1 i did it 
the same way, and i had absolutely no doubt that it will fit if its like 
in the example. So the master tried to configure slave in position 1 
while there was only one slave on position 0.
After that it worked and i was able to fix the remaining little things 
(corrupted frames, timed out frames,...).

Thank you for your patience.
Regards

Christian

Florian Pose schrieb:
> On Mon, Dec 08, 2008 at 03:52:33PM +0100, Christian Gieseler wrote:
>> The syslog output tells me that the master fails to create the slave 
>> configuration.
> 
> This is probably the problem. Which reason does it output?
> 
>> Requesting the safeop state gives the syslog output :
>>
>> slave 0 refused state change (PREOP+ERROR), caused by an invalid sync 
>> manager configuration.
> 
> This is reasonable, because if the slave has no configuration attached,
> the Pdo sync managers will not be configured, which fits to your
> descriptions.
> 
>> P.S. Am i right on this mailing list, or should i post on the users list 
>> and sorry for posting to you directly.
> 
> This is typically something for the users list, but don't break the thread
> now. ;-)
> 



More information about the etherlab-dev mailing list