[etherlab-dev] EtherCAT :: generatingvoltageon BeckhoffEL4732terminal fails

[Florian Pose]

Hi,

On Fri, Apr 17, 2009 at 10:37:42AM +0200, Daniel Bechter wrote:
> I think that the EL4732 terminal is too sophisticated.

this device is an oversampling slave that needs the distributed clocks
sync0 signal to output its data. If that is not configured, it never
updates its outputs. Moreover the device doesn't make any sense when not
synchronized.

-- 
Best regards,
Florian Pose

http://etherlab.org