[etherlab-users] Working counter of EL9820

[Hobin Yoon]

Here it is.

# ethercat config -v
Alias: 0
Position: 0
Vendor Id: 0x00000002
Product code: 0x04570862
Attached slave: 0 (OP)
SM0 (Output)
  Pdo 0x1a00
    Pdo entry 0x3101:01,  8 bit
SM1 (Output)
  Pdo 0x1a01
    Pdo entry 0x3101:02,  8 bit
SM2 (Input)
  Pdo 0x1600
    Pdo entry 0x3001:01,  8 bit
  Pdo 0x1601
    Pdo entry 0x3001:02,  8 bit
Sdo configuration:
  None.

Regards,
Hobin Yoon

On Tue, Dec 9, 2008 at 6:25 PM, Florian Pose <fp at igh-essen.com> wrote:

> On Tue, Dec 09, 2008 at 06:11:10PM +0900, Hobin Yoon wrote:
> > # ethercat slave -v
> > === Slave 0 ===
> > ...
>
> Ok, the slave does not support CoE, so the PDOs can not be configured by
> the master.
>
> > # ethercat config -v
> > (nothing... correct?)
>
> Sorry, this is only applicable with a loaded application. Could you
> repeat that?
>
> --
> Best regards,
> Florian Pose
>
> http://etherlab.org
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20081209/ac444b55/attachment-0003.htm>