[etherlab-users] Working counter of EL9820

[Hobin Yoon]

Any update?

On Tue, Dec 9, 2008 at 7:19 PM, Hobin Yoon <hobinyoon at gmail.com> wrote:

> Here it is.
>
> # ethercat config -v
> Alias: 0
> Position: 0
> Vendor Id: 0x00000002
> Product code: 0x04570862
> Attached slave: 0 (OP)
> SM0 (Output)
>   Pdo 0x1a00
>     Pdo entry 0x3101:01,  8 bit
> SM1 (Output)
>   Pdo 0x1a01
>     Pdo entry 0x3101:02,  8 bit
> SM2 (Input)
>   Pdo 0x1600
>     Pdo entry 0x3001:01,  8 bit
>   Pdo 0x1601
>     Pdo entry 0x3001:02,  8 bit
> Sdo configuration:
>   None.
>
> Regards,
> Hobin Yoon
>
> On Tue, Dec 9, 2008 at 6:25 PM, Florian Pose <fp at igh-essen.com> wrote:
>
>> On Tue, Dec 09, 2008 at 06:11:10PM +0900, Hobin Yoon wrote:
>> > # ethercat slave -v
>> > === Slave 0 ===
>> > ...
>>
>> Ok, the slave does not support CoE, so the PDOs can not be configured by
>> the master.
>>
>> > # ethercat config -v
>> > (nothing... correct?)
>>
>> Sorry, this is only applicable with a loaded application. Could you
>> repeat that?
>>
>> --
>> Best regards,
>> Florian Pose
>>
>> http://etherlab.org
>> _______________________________________________
>> etherlab-users mailing list
>> etherlab-users at etherlab.org
>> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20081215/9fee2627/attachment-0004.htm>