[etherlab-users] Inavalid (SyncManager) Input Configuration

[Frank Werner]

Hi Florian,

could you give us a date for the 1.3.3 resp. 1.4 release?

-Frank-

Am Do, 5.06.2008, 12:55, schrieb Florian Pose:
> Hi,
>
> On Thu, Jun 05, 2008 at 01:52:46PM +0200, Wilfried Moritz wrote:
>> I experienced similar problems with a EL3202 terminal, it reported AL
>> status code 0x1D "Invalid Output Configuration".  Disabling the output
>> syncManager (syncMgr 2), which is of size 0,  helped. (see my previous
>> post to the etherlab-users mailing lsit)
>>
>> EL3202 is an AnalogIn terminal, whereas EL4002 is an AnalogOut
>> terminal. So disabling the input sync manager (SM3, size 0) might help
>> with your EL4002 problems.
>
> this has been changed for the 1.4 branch, I will also release a 1.3.3
> version with this fix.
>
> --
> Best regards,
> Florian Pose
>
> http://etherlab.org
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at lists.etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>


-- 
Frank Werner
Schlehenweg 6
D-34266 Niestetal
Telefon: +49 561 9708078
Telefax: +49 561 9708077
Handy:   +49 151 11247562
Internet: http://www.WeSoft.de
eMail: Frank at WeSoft.de
GnuPG: 0xD9B2D504