[etherlab-users] Fixed timeouts without --enable-cycles

[Florian Pose]

Hi all,

I located and hopefully fixed the problem with frame timeouts when
configuring the EtherCAT master 1.4 without --enable-cycles.

All of you, that were affected by this problems: Please check, if they
are gone with this version:

http://etherlab.org/download/ethercat-1.4.0-rc3-r1529.tar.bz2
http://etherlab.org/download/ethercat-1.4.0-rc3-r1529.tar.bz2.sig

Don't forget to configure without --enable-cycles, or better use
--disable-cycles! If no frame timeouts happen, it's all fine. Please let
me know.

This is probably the last change before version 1.4.0.

-- 
Best regards,
Florian Pose

http://etherlab.org