[etherlab-users] RTL8168

[li.peng]

Hi Florian，
Thanks for your reply.
I have ported a RTL8168 driver for EtherLab on kernel-2.6.23.Now it can run.
I want to use EtherLab on standard linux kernel with .
Because EtherLab_RTW need RTAI,so I just use EtherCAT master.
Therefore I think that I need implement a configuration tool by myself on statndard linux kernel.
I hope the tool can simply import slave's xml file and configure EtherCAT network.

Best  regards,
Li.peng

-----邮件原件-----
发件人: etherlab-users-bounces at etherlab.org [mailto:etherlab-users-bounces at etherlab.org] 代表 Florian Pose
发送时间: 2008年10月17日 22:07
收件人: etherlab-users at etherlab.org
主题: Re: [etherlab-users] RTL8168

Hi,

On Fri, Oct 17, 2008 at 10:54:53AM +0800, li.peng wrote:
> 1。Could etherlab support RTL8168？

sure, it should be possible to write an EtherCAT-capable Ethernet driver
for any hardware.

> 2。Could etherlab communicate with CIFX 50-RE of hilscher？

I personally tested several Hilscher slaves successfully with a Hilscher
developer on the last EtherCAT Plugfest.

Apart from that, it should be possible to use *any* slave with the IgH
EtherCAT master. If not, please let me know.

Do you just want to use the EtherCAT master, or other EtherLab
components, too?

--
Best regards,
Florian Pose

http://etherlab.org
_______________________________________________
etherlab-users mailing list
etherlab-users at etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users