[etherlab-users] Installation Problem

[Viktor Rees]

Hallo,

I am still not successful to install the network device using following COnfiguration: 
* Suse 11.0 with Kernel 2.6.25. 
* Ethercat 1.4.0 with 8239too driver taken from development stream 1.5
 
/etc/sysconfig/ethercat:
MASTER0_DEVICE="00:50:fc:4c:87:45"
DEVICE_MODULES="8139too"

dmesg after reboot:
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:02:0b.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.28
PCI: Found IRQ 11 for device 0000:02:0b.0
PCI: Sharing IRQ 11 with 0000:02:0a.0
eth0: RealTek RTL8139 at 0xd8de8800, 00:50:fc:4c:87:45, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
PCI: Found IRQ 9 for device 0000:02:0c.0
PCI: Sharing IRQ 9 with 0000:00:1f.3
PCI: Sharing IRQ 9 with 0000:02:0a.1
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
parport_pc 00:10: reported by Plug and Play BIOS
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
gameport: CS46xx Gameport is pci0000:02:0c.0/gameport0, speed 1387kHz
ppdev: user-space parallel port driver
Adding 578332k swap on /dev/sda2.  Priority:-1 extents:1 across:578332k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel at redhat.com
loop: module loaded
fuse init (API version 7.9)
powernow: This module only works with AMD K7 CPUs
IA-32 Microcode Update Driver: v1.14a <tigran at aivazian.fsnet.co.uk>
EtherCAT: Master driver 1.4.0 r1611
EtherCAT: 1 master waiting for devices.
ec_8139too EtherCAT-capable Fast Ethernet driver 0.9.28, master 1.4.0 r1611
PCI: Found IRQ 11 for device 0000:02:0b.0
PCI: Sharing IRQ 11 with 0000:02:0a.0
ec_8139too 0000:02:0b.0: Invalid PCI mem region size(s), aborting
Trying to free nonexistent resource <000000000000d800-000000000000d8ff>
Trying to free nonexistent resource <00000000feaff800-00000000feaff8ff>
NET: Registered protocol family 10
lo: Disabled Privacy Extensions

/etc/init.d/ethercat stop
EtherCAT: Master module cleaned up.
8139too Fast Ethernet driver 0.9.28
eth0: RealTek RTL8139 at 0xd8de8800, 00:50:fc:4c:87:45, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'

What's the meaning of the above message: 'ec_8139too 0000:02:0b.0: Invalid PCI mem region size(s), aborting' ?

Thanks

Viktor
-- 
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger01