[etherlab-users] EtherCAT blocks in Simulink

[Andrej Mueller]

Hi, 

Sorry  for the formatting. Once again:

> Hi  all,
> 
> I wrote a message about integration ECAT blocks in Simulink on Windows a couple 
> of weeks earlier, but with unprocessed result. However ones more, I try to 
> integrate EtherCAT lib in Simulink on Windows Platform, I already solved the
> Problems with MEX-Compiler. So I can create models with ECAT blocks form 
> Etherlab lib. in Simulink without an error. I saw that the ECAT blocks are 
> written as S-Funktions in Simulink, but how the block communicate with the 
> Hardware? As I understand the C MEX S-Functions in Simulink, I just need to 
> switch the interface of the blocks from Eteherlab to my own. Because the target 
> platform which we have is x86 and it exist a .tlc file for this in Simulink. My 
> question is, which .tlc file from Etherlab lib have to be changed to get all 
> needed information for the blocks from my own initerface S-Function?   
> 
> 

 Kind regards
 
 Andrej Mueller
 
 
 --
 AFPT GmbH
 Trinkbornstraße 15-17
 56281 Doerth
 Germany
 
 Phone: +49 6747 950185-0 | Fax: +49 6747 950185-9 | Url: www.afpt.de
 
 Amtsgericht Koblenz | HRB 20 638 | USt-IdNr. DE253125882
 Geschäftsführer: Dr.-Ing. Patrick Kölzer, Frank-Andre Rittenbruch