[etherlab-users] Master0 dead
Christian Gieseler
chg at alpenjodel.de
Wed Feb 11 13:56:45 CET 2009
Hello Clemens,
do you heve two nics or only one? I'am asking because the nics in output of dmesg doesn't match the nic specified in the output of ethercat master.
Maybe doublecheck the entry in your sysconfig file.
Regards Christian
> Hi,
>
> I installed the EtherCAT master stack 1.5, configerd it with proper MAC
> address and it seems to have troubles starting.
> I'm confused about different state messages -> please see outputs below:
>
> ------------------------------------------------------------------------
> --------------------------------------------------------
> > dmesg
> EtherCAT: Master driver devel r1655
> EtherCAT: 1 master waiting for devices.
> ACPI: PCI interrupt for device 0000:06:04.0 disabled
> ec_8139too EtherCAT-capable Fast Ethernet driver 0.9.28, master devel
> r1655
> ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 19 (level, low) -> IRQ 18
> eth1: RealTek RTL8139 at 0xf8df4c00, 00:02:44:68:9e:33, IRQ 18
> eth1: Identified 8139 chip type 'RTL-8139C'
> udev: renamed network interface eth1 to eth3
>
>
> > /opt/etherlab/bin/ethercat master
> Master0
> Phase: Waiting for device...
> Slaves: 0
> Device0: a2:ff:02:5d:a9:84 (waiting...)
> Tx count: 0
> Rx count: 0
> Device1: None.
>
> > /etc/init.d/ethercat status
> Checking for EtherCAT master devel
> Master0 dead
> ------------------------------------------------------------------------
> --------------------------------------------------------
>
>
> looking forward for any help!
>
> thanks,
> Clemens
>
> Important Notice:
> This electronic transmission (including any attachments) is intended
> solely for the use and information
> of the addressee(s). It may contain confidential or legally privileged
> information. Any unauthorized use
> or disclosure of this message is strictly prohibited.If you are not the
> intended recipient, please notify
> the sender immediately and delete the message and its attachments.
> The sender does not guarantee the integrity of this transmission and shall
> therefore never be liable if
> the message is altered or falsified nor for any virus, interception or
> damage to your system.
>
--
Jetzt 1 Monat kostenlos! GMX FreeDSL - Telefonanschluss + DSL
für nur 17,95 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a
More information about the Etherlab-users
mailing list