[etherlab-users] Problems with EL9820

[Florian Pose]

Hi,

On Fri, Jul 10, 2009 at 03:51:42PM +0200, Andrea Fumarco - Syco wrote:
>  I'm testing a Beckhoff EL9820 Evaluation Kit configured in PIC mode.
>  I'm not able to set the slave to OP state, when I send the command:

probably you don't have specified a slave configuration, have you?.
You'll need an application using the master's application interface to
provide a slave configuration for your slave. Please consult the master
documentation first and have a look at the application examples.

-- 
Best regards,
Florian Pose

http://etherlab.org