[etherlab-users] EtherLab: Code generation issues?

[Marco Götze]

Hello,

> On Mon, Mar 23, 2009 at 04:23:08PM +0100, Marco Götze wrote:
> > We've been experimenting with the latest EtherLab release (1.2-rc5)
> > in conjunction with MATLAB 2007B.  Aiming to trace issues with a
> > test application of our own, we've had a look at the included
> > example and observed the same: the code generated seems to
> > correctly handle data from input terminals but does not effectively
> > output anything.  We verified this by looking at the datagrams on
> > the bus using Wireshark.
> I recently noticed that problem. Obviously something was changed in
> 2007b, the update code is only generated if there is at least a dummy
> mdlUpdate() function present in the s-Function. I fixed that for rc5.
> Are you sure you're using the latest version? Did you invoke
> 'setup_etherlab' after installation?

Yes, but you guessed right -- when installing EtherLab, doing so via the 
stand-alone download failed with some error, which made me revert to 
the latest bundled download.  What I failed to realize then was that 
the bundle included rc4 rather than rc5.  Now, after upgrading the 
bundled EtherLab and reinstalling it, things work as expected. :-)


Thanks--

  Marco
-- 
Dipl.-Inf. Marco Götze, System Design, +49 (3677) 6955-42
Institut für Mikroelektronik- und Mechatronik-Systeme (IMMS) gGmbH
Ehrenbergstr. 27 · D-98693 Ilmenau · <http://www.imms.de/>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 190 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20090325/01fbeecb/attachment-0004.sig>