[etherlab-users] Kernel question

[John Erlandsson]

Hi!

I'm new to etherlab, and in the process of setting up my first master.

My system.
OS: Fedora 12
Kernel: 2.6.31.5-127
Ethernet card: Intel Corporation 82567LF Gigabit Network Connection (rev 03)


Tried to set up the installation of ethercat 1.4.0 with the following 
command:
/./configure --enable-e1000 --disable-8139too --enable-cycles/

This gave me the output:
/checking for Linux kernel sources... 
/usr/src/kernels/2.6.31.12-174.2.3.fc12.i686 (Kernel 
2.6.31.12-174.2.3.fc12.i686)
checking for kernel for e1000 driver... configure: error: kernel 2.6.31 
not available for e1000 driver!/

The command /lsmod | grep e1000/, gives me this output:
/e1000e                133776  0

/When checking the web page i found that version 1.4.0 only supports the 
driver up until kernel 2.6.24.

*THE QUESTION:* Should I somehow install kernel 2.6.24 on my system, or 
try using the 1.5 master with kernel 2.6.29?

Appreciate any help...

//John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20100215/b63f209b/attachment-0002.htm>