[etherlab-users] ecrt_master_send

[Peter van Knippenbergh]

Hi

Is the call ecrt_master_send a blocking call, that will return when the data
is transmitted over the network??

 

 

Kind regards

 

Peter

 

Peter van Knippenbergh

Test and Software designer

------------------------------------------__________________________________
___________________________

Sioux. Source of your development.

 

Sioux Embedded Systems B.V.

Esp 405 | 5633 AJ Eindhoven | The Netherlands

KvK Eindhoven 17093039

 

T +31 (0)40 2677100

T +31 (0)40 2677108 (direct)

F +31 (0)40 2677101

E  <mailto:peter.van.knippenbergh at sioux.eu> peter.van.knippenbergh at sioux.eu

 

Visit us at: www.sioux.eu

e-mail  <mailto:peter.van.knippenbergh at sioux.eu>
peter.van.knippenbergh at sioux.eu



"Sioux, the embedded systems specialists adding (more) value"

 

DISCLAIMER:

 

De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is
uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht
ontvangt, wordt u verzocht de inhoud niet te gebruiken en de afzender direct
te informeren door het bericht te retourneren.

 

The information contained in this message may be confidential and is
intended to be exclusively for the addressee. Should you receive this
message unintentionally, please do not use the contents herein and notify
the sender immediately by return e-mail.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20100121/b31951a9/attachment-0003.htm>