[etherlab-users] WG: possible master problems

[Dipl.-Ing. (FH) Florian Pose]

Hello,

Am 09. März um 11:47 schrieb Ian Norton:
> I tried "0x1600", but it still kicks the drive into PREOP.

you can read the PDOs out of the slave with 'ethercat pdos -pX, or
better, 'ethercat cstruct -pX'.

> attached is the messages o/p

Please thry with the values from above, if it does not work, please
enable debugging before starting your application, like I wrote before,
because otherwise the logs are lacking the important debug messages.

-- 
Viele Grüße,
Florian Pose

------------------------------------------------------------------------
Dipl.-Ing. (FH) Florian Pose                 Amtsgericht Essen HRB 11500
Ingenieurgemeinschaft IgH                    USt-Id.-Nr.: DE 174 626 722
Ges. für Ingenieurleistungen mbH             Geschäftsführung:
Heinz-Bäcker-Str. 34                         Dr.-Ing. S. Rotthäuser
D-45356 Essen                                Dr.-Ing. T. Finke
Tel.: +49 201 / 360-14-13                    Dr.-Ing. W. Hagemeister
Fax.: +49 201 / 360-14-14                    Tel.: +49 201 / 360-14-0
fp at igh-essen.com                             http://www.igh-essen.com

GnuPG key: CCA047CC 2007-12-18 [expires: 2012-12-16]
Fingerprint: 0081 4005 FE9F 73FF 4BDA  A409 0011 4E20 CCA0 47CC
------------------------------------------------------------------------