[etherlab-users] WG: possible master problems
Ian Norton
I.Norton at CranfieldAerospace.com
Tue Mar 9 16:27:25 CET 2010
Hi,
I stopped and started the master, enabled debug 1. I switched my device on and off, then ran my program.
I did pdos -p0 and cstruct -p0 and there is no output!!!
Attached is the message file (copied to "pp").
I must be doing something stupid?
regards
Ian
-----Original Message-----
From: Dipl.-Ing. (FH) Florian Pose [mailto:fp at igh-essen.com]
Sent: 09 March 2010 14:58
To: Ian Norton
Cc: EtherLab Users List
Subject: Re: [etherlab-users] WG: possible master problems
Hello,
Am 09. März um 11:47 schrieb Ian Norton:
> I tried "0x1600", but it still kicks the drive into PREOP.
you can read the PDOs out of the slave with 'ethercat pdos -pX, or
better, 'ethercat cstruct -pX'.
> attached is the messages o/p
Please thry with the values from above, if it does not work, please
enable debugging before starting your application, like I wrote before,
because otherwise the logs are lacking the important debug messages.
--
Viele Grüße,
Florian Pose
------------------------------------------------------------------------
Dipl.-Ing. (FH) Florian Pose Amtsgericht Essen HRB 11500
Ingenieurgemeinschaft IgH USt-Id.-Nr.: DE 174 626 722
Ges. für Ingenieurleistungen mbH Geschäftsführung:
Heinz-Bäcker-Str. 34 Dr.-Ing. S. Rotthäuser
D-45356 Essen Dr.-Ing. T. Finke
Tel.: +49 201 / 360-14-13 Dr.-Ing. W. Hagemeister
Fax.: +49 201 / 360-14-14 Tel.: +49 201 / 360-14-0
fp at igh-essen.com http://www.igh-essen.com
GnuPG key: CCA047CC 2007-12-18 [expires: 2012-12-16]
Fingerprint: 0081 4005 FE9F 73FF 4BDA A409 0011 4E20 CCA0 47CC
------------------------------------------------------------------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pp
Type: application/octet-stream
Size: 2245 bytes
Desc: pp
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20100309/9bb70951/attachment-0004.obj>
More information about the Etherlab-users
mailing list