[etherlab-users] FW: WG: possible master problems

[Ian Norton]

-----Original Message-----
From: Ian Norton 
Sent: 09 March 2010 10:32
To: 'Florian Pose'
Subject: RE: [etherlab-users] WG: possible master problems


Hi Florian,

Are these ethercat "magic" numbers? I have seen them before in the sparse documentation from Festo (the other device I want to drive) (BTW its not on the network at the moment). And I did use them as index's when trying to drive that device, but I didn't see the same info in the s300 docs.

What do you suggest for the "**" in each case, or where can I find that info?

regards
Ian

-----Original Message-----
From: etherlab-users-bounces at etherlab.org
[mailto:etherlab-users-bounces at etherlab.org]On Behalf Of Florian Pose
Sent: 09 March 2010 09:27
To: etherlab-users at etherlab.org
Subject: Re: [etherlab-users] WG: possible master problems


On Tue, Mar 09, 2010 at 09:27:36AM +0100, Olaf Holowenko wrote:
> Why 0x1c12? Try 0x1A** / 0x16** for input / output.

Yes, thanks for pointing this out. I must be blind. ;-)

-- 
Best regards,
Florian Pose

http://etherlab.org
_______________________________________________
etherlab-users mailing list
etherlab-users at etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users