[etherlab-users] Build error in RTW: implicit declaration of function 'xxxxxxxxxxxxx'

Dr.-Ing. Wilhelm Hagemeister hm at igh-essen.com
Fri Nov 19 10:58:32 CET 2010


Hello Alex,

please use a 1.3-EtherLab-Version, or a "older" Matlab.
Important: for Etherlab-1.3 you need a 1.5-EtherCatmaster.
you find both on the etherlab.org site.

Greetings Wilhelm.

Am 18.11.2010 19:12, schrieb Alex C. Marton:
> Hello!
> 
> Thank you for answering! I really need your help on this one.
> My linux version is: openSUSE 11.2 "Emerald" - Kernel \r
> My RTAI version is 3.7.1
> Matlab is R2009b, Simulink version is: v 7.4 and RTW is: v 7.4
> 
> Thank you!
> Alex
> 
> ------------------------------------------------------------------------
> *From:* Dr.-Ing. Wilhelm Hagemeister <hm at igh-essen.com>
> *To:* Alex C. Marton <martonalex at yahoo.com>; etherlab-users at etherlab.org
> *Sent:* Thu, November 18, 2010 5:56:15 PM
> *Subject:* Re: [etherlab-users] Build error in RTW: implicit declaration
> of function 'xxxxxxxxxxxxx'
> 
> Hallo Alex,
> 
> please supply information over:
> 
> LINUX-Version (which 2.6.xx)
> RTAI-Version
> Matlab/Simulink/RTW-Version
> 
> Wilhelm.
> 
> Am 18.11.2010 17:39, schrieb Alex C. Marton:
>> Hi!
>> First I want to say that I have already searched your mailing list for
>> threads on my issue, but I did not find any.
>> I am using etherlab 1.2-rc10 on linux kernel 2.6. I tried building a
>> simple Simulink model from scratch like you instructed in the guide of
>> Etherlab, here:
>> http://etherlab.org/download/etherlab/etherlab-1.2.pdf
>> <http://etherlab.org/download/etherlab/etherlab-1.2.pdf>I put in an
>> EK1100 EtherCAT coupler block, an EL4132-AO block and a sine-wave into
>> that (the EL4132). Nothing special here (exactly the same model as the
>> right lower part of your standard "example.mdl" model that you show to
>> users). I did the necessary configurations for the simulation and I
>> clicked Ctrl+B.
>> It started to build the RTW model and after countless compilation and
>> build messages (nothing unusual, no warnings, no errors), at the end it
>> says:
>>
>> test1.c: In function 'test1_output':
>> test1.c:72: error: implicit declaration of function 'rtmIsMajorTimeStep'
>> gmake: *** [test1.o] Error 1
>> Real-Time Workshop build procedure for model: 'test1' aborted due to an
>> error.
>>
>> Why is it doing that? How do I fix this error because I know I am not
>> doing anything wrong. The standard "example.mdl" model gives me the same
>> exact build output message when I try to build it.
>>
>> Thank you for your time and patience!
>> Alex Marton
>>
>>
>>
>>
>> _______________________________________________
>> etherlab-users mailing list
>> etherlab-users at etherlab.org <mailto:etherlab-users at etherlab.org>
>> http://lists.etherlab.org/mailman/listinfo/etherlab-users
> 
> 




More information about the Etherlab-users mailing list