[etherlab-users] Build error in RTW: implicit declaration of function 'xxxxxxxxxxxxx'

[Dr.-Ing. Wilhelm Hagemeister]

Hallo Alex,

please supply information over:

LINUX-Version (which 2.6.xx)
RTAI-Version
Matlab/Simulink/RTW-Version

Wilhelm.

Am 18.11.2010 17:39, schrieb Alex C. Marton:
> Hi!
> First I want to say that I have already searched your mailing list for
> threads on my issue, but I did not find any.
> I am using etherlab 1.2-rc10 on linux kernel 2.6. I tried building a
> simple Simulink model from scratch like you instructed in the guide of
> Etherlab, here:
> http://etherlab.org/download/etherlab/etherlab-1.2.pdf
> <http://etherlab.org/download/etherlab/etherlab-1.2.pdf>I put in an
> EK1100 EtherCAT coupler block, an EL4132-AO block and a sine-wave into
> that (the EL4132). Nothing special here (exactly the same model as the
> right lower part of your standard "example.mdl" model that you show to
> users). I did the necessary configurations for the simulation and I
> clicked Ctrl+B. 
> It started to build the RTW model and after countless compilation and
> build messages (nothing unusual, no warnings, no errors), at the end it
> says:
> 
> test1.c: In function 'test1_output':
> test1.c:72: error: implicit declaration of function 'rtmIsMajorTimeStep'
> gmake: *** [test1.o] Error 1
> Real-Time Workshop build procedure for model: 'test1' aborted due to an
> error.
> 
> Why is it doing that? How do I fix this error because I know I am not
> doing anything wrong. The standard "example.mdl" model gives me the same
> exact build output message when I try to build it. 
> 
> Thank you for your time and patience!
> Alex Marton
> 
> 
> 
> 
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users