[etherlab-users] SII content correct, problems persist

[Oliver.Haala at semikron.com]

Hello Wilhelm,

I'm afraid, but I have to tell you that it doesen't work.
I have written the SII configuration of TwinCAT with the
sii_write-command to the EEPROM, but running the application
causes the same problems. No difference.

There should be a change in the output of the sii_read-command 
but there isn't. The written FF's don't appear. 

Anyway, Thanks for support.

Regards 
Oliver

IMPORTANT NOTICE - The contents of this email and attachments are confidential. If you are not the intended recipient you must not use, copy, distribute or rely on this email and should please return it immediately or notify us by telephone. While we take every reasonable precaution to screen out computer viruses from emails, attachments to this email may contain such viruses. We cannot accept liability for loss or damage resulting from such viruses.  The integrity of email across the Internet cannot be guaranteed and SEMIKRON will not accept liability for any claims arising as a result of the use of this medium for transmissions by or to SEMIKRON.

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________