[etherlab-users] How to set tcp Port for etherlab_buddy
Richard Hacker
ha at igh-essen.com
Tue Oct 19 09:07:57 CEST 2010
Hi,
It seems as though you do not have any real time application running.
etherlab_buddy opens one port starting from 2345 for every running real time
application. rt_appcore is only the framework to allow these applications to
run in real time.
Richard
On Monday 18 October 2010 23:01:36 Beat Gerber wrote:
> Beat Gerber <beat.gerber at ...> writes:
> > Hello all,
> > Is there some documentation on how etherlab buddy interacting with
> > testmanager. Or how to get Testmanager listening to etherlab_buddy.
>
> some more informations:
>
> ******************
> ]# dmesg
> ...
> RTAI[sched]: hard timer type/freq = APIC/12558588(Hz); default timing:
> periodic; linear timed lists.
> RTAI[sched]: Linux timer freq = 1000 (Hz), TimeBase freq = 2812807000 hz.
> RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
> RTAI[math]: loaded.
> Starting RT-AppCore 1.3-pre
> Successfully started RT-AppCore
> ******************
>
> everything seems to be OK but ..
>
>
> Start Etherlab buddy OK ..
> ]# etherlab_buddy -f
>
> but
> ]$ nc6 127.0.0.1 2345
> nc6: unable to connect to address 127.0.0.1, service 2345
>
> I hope someone can give me a hint!
>
>
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>
--
------------------------------------------------------------------------
Richard Hacker Amtsgericht Essen HRB 11500
Ingenieurgemeinschaft IgH USt-Id.-Nr.: DE 174 626 722
Ges. für Ingenieurleistungen mbH Geschäftsführung:
Heinz-Baecker-Str. 34 Dr.-Ing. S. Rotthäuser
D-45356 Essen Dr.-Ing. T. Finke
Tel.: +49 201 / 36014-16 Dr.-Ing. W. Hagemeister
Fax.: +49 201 / 36014-14 Tel.: +49 201 / 360-14-0
richard.hacker at igh-essen.com http://www.igh-essen.com
------------------------------------------------------------------------
More information about the Etherlab-users
mailing list