[etherlab-users] How to set tcp Port for etherlab_buddy

[Beat Gerber]

Richard Hacker <ha at ...> writes:

> 
> Hi,
> 
> It seems as though you do not have any real time application running. 
> etherlab_buddy opens one port starting from 2345 for every running real time 
> application. rt_appcore is only the framework to allow these applications to 
> run in real time.
> 
> Richard


Hi Richard,

OK .. this was not clear to me. I thought as I can access the modules directly
over TCP .. and if I need to also put a realtime module in between.
So now I have to create a realtime gateway.
I'll try to install ethercos with no success :-( is there a newer Version around?
ScicosLab-4.4b7 is installed (Fedora 13) 
 
ethercos-0.0.2-rc15]$ make
echo "execute builder.sce in scilab"
execute builder.sce in scilab
scilab -nw -nb -f builder.sce;
 
    
 
 Scilab Version not supported   
 
 warning: stack problem..., cleared
 
-->

Should this work? Or is there a known problem?

Beat