[etherlab-users] Created scicoslab block

[Andreas Stewering-Bone]

Hello Simone,

can you post your Makefile.

But note the RTAI-Codegenerator creates code for an lxrt-Target. You 
need an lxrt or RTDM driver interface to use the master. But there is none.

Maybe in a few weeks, there will be a RTDM-Interface for the 
EtherCAT-Master. Then it can be full integrated into RTAILAB.

Greatings

Andreas



Am 27.01.2011 19:33, schrieb simone.monteleone at alice.it:
>  Hi all,
>
> I try to created  C block in scicos (scicoslab) but I have problem to 
> link the libethercat.so
>
> (/opt/etherlab/lib/libethercat.so)
>
> In other hand I think the other problem is to link the rtai lib
>
> simone monteleone
> Inviato dalla nuova Alice mail 
> <http://go.alice.it/CLKC_WP_FE_footer/http://mail.alice.it>
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>    


-- 

-----------------------------------------------------------------------

Dipl.-Ing. Andreas Stewering-Bone           Amtsgericht Essen HRB 11500
Ingenieurgemeinschaft IgH                   USt-Id.-Nr.: DE 174 626 722
Gesellschaft für Ingenieurleistungen mbH    Geschäftsführung:
Heinz-Bäcker-Str. 34                        Dr.-Ing. S. Rotthäuser
D-45356 Essen                               Dr.-Ing. T. Finke
Tel.: +49 201 / 360-14-15                   Dr.-Ing. W. Hagemeister
Fax.: +49 201 / 360-14-14                   Tel.: +49 201 / 360-14-0
Andreas.Stewering-Bone at igh-essen.com        http://www.igh-essen.com

-----------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20110128/fdfedc26/attachment-0005.htm>