[etherlab-users] (SECOND TIME) Further comment regarding "No such device"
Jeff Krasky
jeff.krasky at dspcg.com
Wed Jul 20 18:17:34 CEST 2011
> Please check the output of dmesg when you start the master via init
> script (/etc/init.d/ethercat start)
I'll paste the entire output at the bottom, but here I will paste what looks
to be relevant. I see this:
ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 66
eth0: RealTek RTL-8029 found at 0x1000, IRQ 66, 00:50:BA:54:8A:69.
hw_random: RNG not detected
eth0 renamed to eth1
...
...
...
ec_master: module not supported by Novell, setting U taint flag.
EtherCAT: Master driver devel unknown
EtherCAT: 1 master waiting for devices.
IA-32 Microcode Update Driver: v1.14 <tigran at veritas.com>
ec_8139too: module not supported by Novell, setting U taint flag.
ec_8139too EtherCAT-capable Fast Ethernet driver 0.9.27, master devel
unknown
IA-32 Microcode Update Driver v1.14 unregistered
> One question: Why do you use such an old kernel?
> I know running system with our stack starting at 2.6.13, but I do not
> see a driver for 2.6.16, maybe there is a driver problem?
I already had this version and since the docs mentioned 2.6 kernel, I went
with it. However, I did run into numerous compiler issues - as a matter of
fact I couldn't even compile the code. Someone else sent me RPMs for that.
If you tell me, or better yet provide a link, to download a version of Linux
that this (1.5) version of ethercat will just compile right away and work
on, that would be great. Perhaps the exact version that you use?
Thanks,
Jeff
lem:~ # dmesg
Linux version 2.6.16.21-0.25-smp (geeko at buildhost) (gcc version 4.1.0 (SUSE
Linux)) #1 SMP Tue Sep 19 07:26:15 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffd8300 (usable)
BIOS-e820: 000000003ffd8300 - 0000000040000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe700
On node 0 totalpages: 262104
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32728 pages, LIFO batch:7
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP (v000 COMPAQ ) @ 0x000e7a10
ACPI: RSDT (v001 COMPAQ CPQ0063 0x20060706 0x00000000) @ 0x3ffd8340
ACPI: FADT (v001 COMPAQ GLENWOOD 0x00000001 0x00000000) @ 0x3ffd83ec
ACPI: MADT (v001 COMPAQ GLENWOOD 0x00000001 0x00000000) @ 0x3ffd8460
ACPI: ASF! (v032 COMPAQ GLENWOOD 0x00000001 0x00000000) @ 0x3ffd84e4
ACPI: MCFG (v001 COMPAQ GLENWOOD 0x00000001 0x00000000) @ 0x3ffd8547
ACPI: TCPA (v001 COMPAQ GLENWOOD 0x00000001 0x00000000) @ 0x3ffd8583
ACPI: DSDT (v001 COMPAQ DSDT_PRJ 0x00000001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Overriding APIC driver with bigsmp
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Physflat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda2 vga=0x317 resume=/dev/sda1
splash=silent
bootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3400.618 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032244k/1048416k available (1611k kernel code, 15384k reserved,
731k data, 188k init, 130912k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6810.83 BogoMIPS
(lpj=13621666)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e49d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e49d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e49d
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2370k freed
not found!
CPU0: Intel(R) Pentium(R) D CPU 3.40GHz stepping 04
Leaving ESR disabled.
Enabling SMP...
Booting processor 1/1 eip 3000
Initializing CPU#1
Leaving ESR disabled.
Calibrating delay using timer specific routine.. 6800.86 BogoMIPS
(lpj=13601733)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e49d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e49d 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e49d
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) D CPU 3.40GHz stepping 04
Total of 2 processors activated (13611.69 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Enabling SMP...
Brought up 2 CPUs
migration_cost=985
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.20 entry at 0xeb4ad, last bus=63
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
TC classifier action (bugs to netdev at vger.kernel.org cc hadi at cyberus.ca)
Setting up standard PCI resources
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x400-0x48f could not be reserved
pnp: 00:0c: ioport range 0xf800-0xf87f could not be reserved
pnp: 00:0c: ioport range 0xfa00-0xfa3f has been reserved
pnp: 00:0c: ioport range 0xfc00-0xfc7f has been reserved
pnp: 00:0c: ioport range 0xfc80-0xfcff has been reserved
pnp: 00:0c: ioport range 0xfe00-0xfe7f has been reserved
pnp: 00:0c: ioport range 0xfe80-0xfeff has been reserved
pnp: 00:0c: ioport range 0xcb0-0xcbf has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: e0500000-e07fffff
PREFETCH window: d0000000-e01fffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: e0200000-e04fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1311153486.920:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pcie_portdrv_probe->Dev[27d0:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total
16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:a0e2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089
bytes,<6>...found (1024x768, 27542 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI wakeup devices:
PCI0 PEG1 PCX1 PCX2 PCX5 PCX6 HUB COM1 USB1 USB2 USB3 USB4 EUSB PBTN
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 188k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 177
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x30a0-0x30a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x30a8-0x30af, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: HL-DT-STDVD+-RW GSA-H21L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
libata version 1.20 loaded.
ahci 0000:00:1f.2: version 1.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xF8828500 ctl 0x0 bmdma 0x0 irq 233
ata2: SATA max UDMA/133 cmd 0xF8828580 ctl 0x0 bmdma 0x0 irq 233
ata3: SATA max UDMA/133 cmd 0xF8828600 ctl 0x0 bmdma 0x0 irq 233
ata4: SATA max UDMA/133 cmd 0xF8828680 ctl 0x0 bmdma 0x0 irq 233
ata1: SATA link up 3.0 Gbps (SStatus 123)
ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01
87:4023 88:207f 93:0000
ata1: dev 0 ATA-7, max UDMA/133, 156301488 sectors: LBA48
sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe46a0
ata1: dev 0 configured for UDMA/133
sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe46a0
scsi0 : ahci
ata2: SATA link down (SStatus 0)
scsi1 : ahci
ata3: SATA link down (SStatus 0)
scsi2 : ahci
ata4: SATA link down (SStatus 0)
scsi3 : ahci
Vendor: ATA Model: ST380815AS Rev: 4.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
Hotpluggable processor device is not present
Hotpluggable processor device is not present
sd 0:0:0:0: Attached scsi generic sg0 type 0
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Attempting manual resume
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
lp0: using parport0 (interrupt-driven).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
usbcore: registered new driver usbfs
usbcore: registered new driver hub
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(44)
Uniform CD-ROM driver Revision: 3.20
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
USB Universal Host Controller Interface driver v2.3
i8xx TCO timer: initialized (0xf860). heartbeat=30 sec (nowayout=0)
hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:2097: autoconfig: line_outs=1
(0x15/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2101: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2103: hp=0x1b, dig_out=0x0, din_in=0x0
ALSA sound/pci/hda/hda_codec.c:2111: inputs: mic=0x18, fmic=0x19,
line=0x1a, fline=0x0, cd=0x1c, aux=0x14
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 58, io mem 0xe0a04000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.21-0.25-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 58, io base 0x00003000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.21-0.25-smp uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 66, io base 0x00003020
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.21-0.25-smp uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 50, io base 0x00003040
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16.21-0.25-smp uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 74, io base 0x00003060
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.16.21-0.25-smp uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 66
eth0: RealTek RTL-8029 found at 0x1000, IRQ 66, 00:50:BA:54:8A:69.
hw_random: RNG not detected
eth0 renamed to eth1
usb 2-1: new low speed USB device using uhci_hcd and address 2
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel at redhat.com
dm-netlink version 0.0.2 loaded
usb 2-1: new device found, idVendor=046d, idProduct=c018
usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Logitech USB Optical Mouse
usb 2-1: Manufacturer: Logitech
usb 2-1: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using uhci_hcd and address 3
usb 2-2: new device found, idVendor=046d, idProduct=c31c
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Keyboard
usb 2-2: Manufacturer: Logitech
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input1
input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on
usb-0000:00:1d.0-1
input: Logitech USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-2
input: Logitech USB Keyboard as /class/input/input3
input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
loop: loaded (max 8 devices)
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
AppArmor: AppArmor (version 2.0-19.43r6320) initialized
audit(1311153513.841:2): AppArmor (version 2.0-19.43r6320) initialized
Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PBTN]
audit(1311171520.344:3): audit_backlog_limit=256 old=64 by auid=4294967295
ec_master: module not supported by Novell, setting U taint flag.
EtherCAT: Master driver devel unknown
EtherCAT: 1 master waiting for devices.
IA-32 Microcode Update Driver: v1.14 <tigran at veritas.com>
ec_8139too: module not supported by Novell, setting U taint flag.
ec_8139too EtherCAT-capable Fast Ethernet driver 0.9.27, master devel
unknown
IA-32 Microcode Update Driver v1.14 unregistered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
bootsplash: status on console 0 changed to on
usb 1-4: new high speed USB device using ehci_hcd and address 4
usb 1-4: new device found, idVendor=0781, idProduct=5544
usb 1-4: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 2GB
usb 1-4: Manufacturer: Ativa
usb 1-4: SerialNumber: 016452111DC2719A
usb 1-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Vendor: Ativa Model: 2GB Rev: 7.01
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdb: 3907583 512-byte hdwr sectors (2001 MB)
sdb: Write Protect is off
sdb: Mode Sense: 45 00 00 08
sdb: assuming drive cache: write through
SCSI device sdb: 3907583 512-byte hdwr sectors (2001 MB)
sdb: Write Protect is off
sdb: Mode Sense: 45 00 00 08
sdb: assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: Attached scsi removable disk sdb
sd 4:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 1-4: USB disconnect, address 4
usb 1-4: new high speed USB device using ehci_hcd and address 5
usb 1-4: new device found, idVendor=0781, idProduct=5544
usb 1-4: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 2GB
usb 1-4: Manufacturer: Ativa
usb 1-4: SerialNumber: 016452111DC2719A
usb 1-4: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: Ativa Model: 2GB Rev: 7.01
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdb: 3907583 512-byte hdwr sectors (2001 MB)
sdb: Write Protect is off
sdb: Mode Sense: 45 00 00 08
sdb: assuming drive cache: write through
SCSI device sdb: 3907583 512-byte hdwr sectors (2001 MB)
sdb: Write Protect is off
sdb: Mode Sense: 45 00 00 08
sdb: assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: Attached scsi removable disk sdb
sd 5:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
More information about the Etherlab-users
mailing list