[etherlab-users] install on non-PC

[Ralf Roesch]

Jeffry did you read the documentation?

    http://www.etherlab.org/download/ethercat/ethercat-1.5-6129a5f715fb.pdf
    9.4 Installing the Software

--
  Ralf

On Tue Nov 22 2011 18:05:07 GMT+0100, Jeff Krasky
<jeff.krasky at dspcg.com>  wrote:
>
> > Did you do the 'make install as root' with ARCH=arm CROSS_COMPILE=...
> or without?
>
>  
>
>  
>
> I did it without.  Then I posted the results.  Then I tried running
> 'depmod' as root.  The filesystem image changed (when doing a binary
> compare, that is), but the output/behavior was the same.  Now I just
> did, as root, 'make install ARCH=arm
> CROSS_COMPILE=arm-unknown-linux-uclibcgnueabi-' and again, the
> filesystem binary image changed but the results are the same:
>
>  
>
> # pwd
>
> /
>
> # find . -iname '*ethercat*'
>
> ./opt/bin/ethercat
>
> ./opt/etc/sysconfig/ethercat
>
> ./opt/etc/init.d/ethercat
>
> ./opt/lib/libethercat.a
>
> ./opt/lib/libethercat.la
>
> # ./opt/etc/init.d/ethercat start
>
> /etc/sysconfig/ethercat not existing
>
> #
>
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20111122/911f3f8d/attachment-0005.htm>