[etherlab-users] RTAI + e1000e?

[Dr.-Ing. Wilhelm Hagemeister]

Hello Jordi,

yes an e1000e driver is available in newer EtherCat Master versions but
we recommend to NOT use a INTEL-Nic for EtherCat (if possible). We have
best experience with the Realtek chipsets due to the fact that these are
the "stupid" chips which you need for good realtime performance.

Wilhelm.

Am 21.09.2011 09:17, schrieb Jordi Blanch Carles:
> Dear all,
> 
> we are considering to use EtherLab Master for a real time control
> application with Ethercat and RTAI, but as new embedded PCs are quite
> difficult to find with an e1000 driver compatible ethernet device, I was
> wondering if a the e1000e driver contained into EtherLab Master sources
> is usable in such a combination (RTAI + EtherLab Master).
> 
> Thank you very much!
> 
> Jordi Blanch Carles
> Unidad de Ensayo y Control
> 
> ENCOPIM S.L.
> C/. del Parc, 5 (nave 13)
> P.I. Els Pinetons
> E-08291 RIPOLLET (Barcelona)
> Tel: (+34) 935 94 23 47
> Fax: (+34) 935 94 64 15
> 
> ==========================================================
> La información contenida en la presente transmisión es confidencial y su
> uso únicamente está permitido a su(s) destinatario(s). Si Ud. no es la
> persona destinataria de la presente transmisión, rogamos nos lo
> comunique de manera inmediata por teléfono (+34 935 942 347) y destruya
> cualquier copia de la misma (tanto digitales como en papel).
> 
> The information contained in this transmission is confidential and is
> intended only for the use of the addressee(s). If you are not the
> designated recipient of this transmission, please advise us immediately
> by telephone (+34 935 942 347) and destroy any copies (digital and
> paper).
> ======================================================
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users