[etherlab-users] RTAI + e1000e?

[Jordi Blanch Carles]

Dear all,

we are considering to use EtherLab Master for a real time control  
application with Ethercat and RTAI, but as new embedded PCs are quite  
difficult to find with an e1000 driver compatible ethernet device, I  
was wondering if a the e1000e driver contained into EtherLab Master  
sources is usable in such a combination (RTAI + EtherLab Master).

Thank you very much!

Jordi Blanch Carles
Unidad de Ensayo y Control

ENCOPIM S.L.
C/. del Parc, 5 (nave 13)
P.I. Els Pinetons
E-08291 RIPOLLET (Barcelona)
Tel: (+34) 935 94 23 47
Fax: (+34) 935 94 64 15

==========================================================
La información contenida en la presente transmisión es confidencial y su
uso únicamente está permitido a su(s) destinatario(s). Si Ud. no es la
persona destinataria de la presente transmisión, rogamos nos lo
comunique de manera inmediata por teléfono (+34 935 942 347) y destruya
cualquier copia de la misma (tanto digitales como en papel).

The information contained in this transmission is confidential and is
intended only for the use of the addressee(s). If you are not the
designated recipient of this transmission, please advise us immediately
by telephone (+34 935 942 347) and destroy any copies (digital and
paper).
======================================================