[etherlab-users] Expected max tx frame rate and a digital off delay issue (repost)

[Mike O'Connor]

On 2/03/12 9:23 AM, Mike O'Connor wrote:
>
> 1. What is the expected max tx frame rate I can expect ?
Still do not know how fast we can run this, but have found that the
highest at this stage is 8K
>
>
> 2. Our test program turns on a digital point and then checks a input
> which is wired to the output, as a result the input comes on 3ms later
> (we are using 3ms filtered inputs) the issue is that some time later the
> code turns of the output but the input does not turn off for 8ms. we can
> not explain this. Any ideas ?
>
I fixed this issue it was electrical, a direct connection between the
output and input with out a way of draining the power (ie a resistor or
ground), will slow the turning ofF of the input.

Mike