[etherlab-users] Modify atmel macb driver to support EtherCAT

[Andreas Stewering-Bone]

Hello Zhi,

Did you try it with the generic interface?

Maybe you can post your code and the failure.

Crash happens after ethercat start or after application start?

Greatings

Andreas


Am 20.03.2012 14:37, schrieb Zhe Zhang:
> Hi all,
>
> I am trying to implement EtherCAT on Atme board. I already loaded 
> linux onto the board and ethernet works fine. After I modified the 
> macb.c which is MAC driver for Atmel ethernet controller, however, 
> linux kernel seems crash when I run the ethercat. Could any one give 
> me some suggestions? I will post the kernel error if it is needed.
>
> Regards,
> Zhe
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>    


Mit freundlichem Gruß

Andreas Stewering-Bone

-- 
------------------------------------------------------------------------

Dipl.-Ing.(FH) Andreas Stewering-Bone
andreas.stewering-bone at igh-essen.com
Tel.: +49 201 / 36014-15

Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Heinz-Bäcker-Str. 34
D-45356 Essen
Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschäftsführung:
- Dr.-Ing. S. Rotthäuser,
- Dr.-Ing. T. Finke,
- Dr.-Ing. W. Hagemeister
Tel.: +49 201 / 360-14-0
http://www.igh-essen.com

------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20120320/f42d65df/attachment-0005.htm>