[etherlab-users] Etherlab blocks in Windows

[Richard Hacker]

Hello,


On Wednesday 16 May 2012 16:50:36 Dirk Castelijns wrote:
> Hello,
> 
> 
> 
> Does anybody know if it is possible to use the Etherlab Simulink blocks in
> Matlab for MS Windows?
> 
> We just want to generate the sources. The actual compilation will be done
>  on a Linux system.
> 
> 
> 
> I can image that some Etherlab scripts have to be cut into 2 parts. Does
> anybody have experience with this?
> 
Yes, you can. View the files README and Makefile.windows.

There is only one quirk when you generate the files using windows: One line in 
the generated <model>.mk contains a windows path, C:\some\path

You will have to change this line by hand every time after generating code. I 
could not automate that. Maybe you make yourself a little script with a sed 
command in it to do that. Otherwise, this is a well used setup by us.
> 
> 
> Thanks
> 
> 
> 
> Dirk
> 

-- 
Mit freundlichem Gruß

Richard Hacker

-- 
------------------------------------------------------------------------

Richard Hacker M.Sc. 
ichard.hacker at igh-essen.com
Tel.: +49 201 / 36014-16

Ingenieurgemeinschaft IgH
Gesellschaft für Ingenieurleistungen mbH
Heinz-Bäcker-Str. 34
D-45356 Essen

Amtsgericht Essen HRB 11500
USt-Id.-Nr.: DE 174 626 722
Geschñftsfìhrung: 
- Dr.-Ing. S. Rotthäuser, 
- Dr.-Ing. T. Finke, 
- Dr.-Ing. W. Hagemeister
Tel.: +49 201 / 360-14-0
http://www.igh-essen.com

------------------------------------------------------------------------