[etherlab-users] 转发：Master can not recognize slaves on the bus

[vilian_ch at sina.com]

----- 原始邮件 -----
发件人：<vilian_ch at sina.com>
收件人："etherlab-users" <etherlab-users at etherlab.org>
主题：Master can not recognize slaves on the bus
日期：2012年11月12日 21点35分


Dear everyone,
We use version 1.5 for our Ethercat master, sometimes I found that the master could not recognize the slaves on the bus when powered on. Using wireshark I could captured datagrams between master and slaves, all datagram types were brd(brocadcast datagram read all slaves's 0x130 registers), it seemed the master could not jump away from this state.
Any one could give me some suggestions?
Thank you in advance!
 
Vilian

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20121113/5aa67614/attachment-0002.htm>