[etherlab-users] tty example not working

[Matthieu Bec]

Hello Parthasarathy,

do you have an EL6002 present in your bus? the demo scans all the slaves 
and only create /dev/tty's when it finds suitable devices.

 > I assume it should be
 > `/etc/init.d/ethercat start`

yes, typo in the readme

Matthieu


On 08/31/12 18:31, Parthasarathy S wrote:
> Hello,
>
> I am trying out the tty example. I've enabled it with --enable-tty option.
> One of the steps in the tty/README file is to run the command
> `rcethercat start`
> There is no such command. I assume it should be
> `/etc/init.d/ethercat start`
>
> There is no error in other steps.
>
> I notice that /dev/ttyEC0 is not created.
>
> Can someone help.
>
> Thanks and best regards
>
>
> --
> Parthasarathy S
> C612 Sena Vihar
> Kammanahalli Main Road
> Bangalore 560043 India
>
>
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>


-- 
Matthieu Bec                GMTO Corp.
cell:  +1 626 354 9367      P.O. Box 90933
phone: +1 626 204 0527      Pasadena, CA 91109-0933