[etherlab-users] etherlab dc sync check

[Raz]

Hey

At the moment it takes a long time to calibrate the dc. aprox 5 seconds
for each slave.  I am setting up a system which is supposed to control
over 12 axes and the calibration duration reaches a minute.

Is it possible to reduce this time ?


-- 
https://sites.google.com/site/ironspeedlinux/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20131230/97c117c5/attachment-0002.htm>