[etherlab-users] 回复:etherlab-users Digest, Vol 68, Issue 7

vilian_ch at sina.com vilian_ch at sina.com
Thu Jan 17 12:22:39 CET 2013

I have also used your vitrual slaves in kernel space.
In one pc, I just start the etherlab master(sudo /etc/init.d/ethercat start),
then in another pc,I insmod ecslave.ko with rxmac=XX:XX:XX:XX:XX:XX(in this pc, i did not start ethercat master)
I want to get some of the slave's infomation, so I just set command: ethercat sl in first pc, but I got nothing.
I also compile code in virtual_slave and start it in first pc.but got nothing.
I using ethercat master command to test ethercat frames, and found all frames are lost and the master can not get
responsed frames.
Can you give me some suggestions?
Thank you in advance!

----- 原始邮件 -----
发件人:etherlab-users-request at etherlab.org
收件人:etherlab-users at etherlab.org
主题:etherlab-users Digest, Vol 68, Issue 7
日期:2013年01月17日 19点00分

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20130117/a524c087/attachment-0002.htm>

More information about the Etherlab-users mailing list