[etherlab-users] 回复：etherlab-users Digest, Vol 68, Issue 7

[Raz Ben Yehuda]

On Thu, 2013-01-17 at 12:22 +0100, vilian_ch at sina.com wrote:
>  Hello,Raz
> I have also used your vitrual slaves in kernel space.
> In one pc, I just start the etherlab master(sudo /etc/init.d/ethercat
> start),
> then in another pc,I insmod ecslave.ko with rxmac=XX:XX:XX:XX:XX:XX(in
> this pc, i did not start ethercat master)
> I want to get some of the slave's infomation, so I just set command:
> ethercat sl in first pc, but I got nothing.
> I also compile code in virtual_slave and start it in first pc.but got
> nothing.
> I using ethercat master command to test ethercat frames, and found all
> frames are lost and the master can not get
> responsed frames.
> Can you give me some suggestions?
> Thank you in advance!
> vilian_ch

first test if it runs in user space. let us check if traffic reaches the
slave pc.
> 
> ----- 原始邮件 -----
> 发件人：etherlab-users-request at etherlab.org
> 收件人：etherlab-users at etherlab.org
> 主题：etherlab-users Digest, Vol 68, Issue 7
> 日期：2013年01月17日 19点00分
> 
> 
> 

-- 
https://sites.google.com/site/ironspeedlinux/