[etherlab-users] Using AX2000 series / S300 drive with EtherLab master

[Dee Jay]

Hi Sebastien,

Thank you for your response.

I will try your code. 

Regards.

DeeJay


>________________________________
> From: Sebastien BLANCHET <blanchet at iram.fr>
>To: etherlab-users at etherlab.org 
>Sent: Friday, July 26, 2013 3:24 PM
>Subject: Re: [etherlab-users] Using AX2000 series / S300 drive with EtherLab master
> 
>
>Hi,
>
>I have worked with Kollmorgen AKD drive (the successor of S300)
>I think that it is not easy to use them at the very beginning
>because you really need to understand how EtherCAT works before using 
>them. In particular, you have to send many SDO commands at the startup
>to define the PDO.
>
>Look at this post:
>http://lists.etherlab.org/pipermail/etherlab-users/2012/001684.html
>
>regards,
>---
>Sebastien BLANCHET
>
>
>On 07/25/2013 12:15 PM, Dee Jay wrote:
>> Hi,
>>
>> Planning to use AX2000 series / S300 drive with EtherLab master.
>>
>> Any samples to run the drive.
>>
>> Suggestion for how to proceed are welcome.
>>
>> Thanks and regards.
>>
>> Dee Jay.
>>
>>
>> _______________________________________________
>> etherlab-users mailing list
>> etherlab-users at etherlab.org
>> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>>
>_______________________________________________
>etherlab-users mailing list
>etherlab-users at etherlab.org
>http://lists.etherlab.org/mailman/listinfo/etherlab-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20130726/9ba18323/attachment-0004.htm>