[etherlab-users] configure: error: kernel 3.8 not available for 8139too driver!

[Jeroen Van den Keybus]

I'm currently running ec_master/ec_generic kernel 3.8.13. No compile issues.

J.



2013/11/5 Richard Hacker <ha at igh-essen.com>

> Sorry, at the moment e100 is only supported for kernel 3.4 natively. Your
> luck may vary using the generic driver, but as you see it is broken for 3.8
> (VM_RESERVED is not defined any more in 3.8).
>
> You will need to drop down to earlier versions unfortunately.
>
>
> Am 11/05/2013 06:24 AM, schrieb Muhammad Nabeel:
>
>> Dear  Thomas,
>>
>> Thank you for your reply,
>>
>> I disable the 8139toodriver and enable generic driver then I run make
>> command and after "make" I run "make modules" but it is giving me this
>> error.
>>
>> nabeel at ubuntu:~/ethercat-default$ make modules
>>
>> make -C "/usr/src/linux-headers-3.8.0-31-generic"
>> M="/home/nabeel/ethercat-default" modules
>> make[1]: Entering directory `/usr/src/linux-headers-3.8.0-31-generic'
>>    CC [M]  /home/nabeel/ethercat-default/master/cdev.o
>> /home/nabeel/ethercat-default/master/cdev.c: In function
>> ‘ec_cdev_ioctl_slave_sdo_upload’:
>> /home/nabeel/ethercat-default/master/cdev.c:864:13: warning: passing
>> argument 7 of ‘ecrt_master_sdo_upload’ from incompatible pointer type
>> [enabled by default]
>> /home/nabeel/ethercat-default/master/../include/ecrt.h:758:5: note:
>> expected ‘size_t *’ but argument is of type ‘uint32_t *’
>> /home/nabeel/ethercat-default/master/cdev.c: In function ‘eccdev_mmap’:
>> /home/nabeel/ethercat-default/master/cdev.c:3964:22: error:
>> ‘VM_RESERVED’ undeclared (first use in this function)
>> /home/nabeel/ethercat-default/master/cdev.c:3964:22: note: each
>> undeclared identifier is reported only once for each function it appears
>> in
>> make[3]: *** [/home/nabeel/ethercat-default/master/cdev.o] Error 1
>> make[2]: *** [/home/nabeel/ethercat-default/master] Error 2
>> make[1]: *** [_module_/home/nabeel/ethercat-default] Error 2
>> make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-31-generic'
>> make: *** [modules] Error 2
>>
>>
>> Please help me how can I fix this issue, actually I am new to Ubuntu and
>> EtherCAT that's why I am facing some problems.
>>
>> Thank you.
>>
>> ------------------------------------------------------------------------
>>
>> From: tbj at automateddesign.com
>> To: hafiz_nabeel91 at hotmail.com
>> CC: etherlab-users at etherlab.org
>> Subject: Re: [etherlab-users] configure: error: kernel 3.8 not available
>> for 8139too driver!
>> Date: Tue, 5 Nov 2013 05:07:36 +0000
>>
>> On 3.8, you'll need the generic driver. There's a flag to disable the
>> 8139too driver. It's enabled by default. You'll also need to enable the
>> generic driver. See the PDF manual for all build flags.
>>
>> If you want to use a hardware driver (recommended), you'll need to drop
>> down to an earlier kernel.
>>
>> (Sent from my mobile device.)
>>
>> On Nov 4, 2013, at 10:51 PM, "Muhammad Nabeel"
>> <hafiz_nabeel91 at hotmail.com <mailto:hafiz_nabeel91 at hotmail.com>> wrote:
>>
>>     Dear All, Hope you are doing well.
>>
>>     I am trying to install IgH EtherCAT master in Ubuntu 12.04, but when
>>     I run ./configuration it is giving "error configure: error: kernel
>>     3.8 not available for 8139too driver!".
>>     Do you have any idea how can I fix this problem?
>>       Thank you guys in advance.
>>
>>     _______________________________________________
>>     etherlab-users mailing list
>>     etherlab-users at etherlab.org <mailto:etherlab-users at etherlab.org>
>>     http://lists.etherlab.org/mailman/listinfo/etherlab-users
>>
>>
>>
>>
>> _______________________________________________
>> etherlab-users mailing list
>> etherlab-users at etherlab.org
>> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>>
>>
> Mit freundlichem Gruß
>
> Richard Hacker
>
> --
> ------------------------------------------------------------------------
>
> Richard Hacker M.Sc.
> richard.hacker at igh-essen.com
> Tel.: +49 201 / 36014-16
>
> Ingenieurgemeinschaft IgH
> Gesellschaft für Ingenieurleistungen mbH
> Heinz-Bäcker-Str. 34
> D-45356 Essen
>
> Amtsgericht Essen HRB 11500
> USt-Id.-Nr.: DE 174 626 722
> Geschäftsführung:
> - Dr.-Ing. T. Finke,
> - Dr.-Ing. W. Hagemeister
> Tel.: +49 201 / 360-14-0
> http://www.igh-essen.com
>
> ------------------------------------------------------------------------
>
> Mit freundlichem Gruß
>
> Richard Hacker
>
> --
> ------------------------------------------------------------------------
>
> Richard Hacker M.Sc.
> richard.hacker at igh-essen.com
> Tel.: +49 201 / 36014-16
>
> Ingenieurgemeinschaft IgH
> Gesellschaft für Ingenieurleistungen mbH
> Heinz-Bäcker-Str. 34
> D-45356 Essen
>
> Amtsgericht Essen HRB 11500
> USt-Id.-Nr.: DE 174 626 722
> Geschäftsführung:
> - Dr.-Ing. T. Finke,
> - Dr.-Ing. W. Hagemeister
> Tel.: +49 201 / 360-14-0
> http://www.igh-essen.com
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> etherlab-users mailing list
> etherlab-users at etherlab.org
> http://lists.etherlab.org/mailman/listinfo/etherlab-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20131105/e79ab2ea/attachment-0004.htm>