[etherlab-users] From master to BECKHOFF EP2338-0001

[Dave Page]

Hi,
     Yes.

     These questions can be answered by visiting the manufacturer page, 
and finding the process data or commissioning information in the product 
datasheet.

https://www.beckhoff.com/english.asp?fieldbus_box/ep2338.htm?id=74619916800719

     So, for the EP2338, there are 8 bits of input process data, 8 bits 
of output process data, and no CoE configuration required. This is on 
the 'easy' end of what can be accomplished with the etherlab master.

     I have not, however, used this module personally. Any given device 
may have quirks or issues in a given application, so it is difficult to 
be completely certain until the device is validated in your design.

         Best regards - Dave

On 08-Apr-14 05:31, etherlab-users-request at etherlab.org wrote:
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 8 Apr 2014 10:44:54 +0200
> From: javier <klm340 at hotmail.com>
> To: etherlab-users at etherlab.org
> Subject: [etherlab-users] From master to BECKHOFF EP2338-0001
> Message-ID: <BLU0-SMTP2471BE099B3BF731C420119926B0 at phx.gbl>
> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed
>
> Hi,
>
> It is possible manage the BECKHOFF EP2338-0001 from the master 1.5.1?
>
> Thanks in advance
>
>
>


-- 
------------------------------------------------------------------------
David Page, Chief Embedded Architect
Dynamic Systems Inc.
PO Box 1234
Poestenkill, NY 12140
Telephone: +1 (518) 283-5350 | Fax: +1 (518) 283-3160 |
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20140408/3572a6f7/attachment-0004.htm>