[etherlab-users] where is ring position come from?

[Zhiyong Weng]

Thank you, Jeroen. This make my life easy.


2014-02-05 Jeroen Van den Keybus <jeroen.vandenkeybus at gmail.com>:

>     For example, I have two slaves and one master , connected as below.
>>     the slave1 always assign position 0? slave2 always assign position 1?
>>
>> master------slave1--------slave2
>>
>>
> Yes, but beware that a bus coupler (e.g. Beckhoff EK1100) also occupies a
> position. So the first module after the coupler has position 1.
>
> J.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20140205/4dd3d982/attachment-0004.htm>