[etherlab-users] where is ring position come from?

[Jeroen Van den Keybus]

>
>     For example, I have two slaves and one master , connected as below.
>     the slave1 always assign position 0? slave2 always assign position 1?
>
> master------slave1--------slave2
>
>
Yes, but beware that a bus coupler (e.g. Beckhoff EK1100) also occupies a
position. So the first module after the coupler has position 1.

J.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.etherlab.org/pipermail/etherlab-users/attachments/20140205/e2d2b218/attachment-0003.htm>