[etherlab-users] is some one working on a debianized version of etherlab with DKMS support for the ethercat drivers

[JR Coding]

> On 12.11.2014 11:26, JR Coding wrote:
>> Hello all,
>>
>> I was wondering if some one is working on a debianized version of the etherlab package
>> ideally with DKMS support for the ethercat driver?
>>
>> I just started to debianize etherlab-1.5.2 but stuck on how to configure that the
>> drivers will be build by DKMS during installation of the debian package but the libraries
>> are build directly during the build of the debian packages.
>>
>> Any advice is welcome....
>>
>> Thanks in advance
>>
>> Joachim
>>
>>
>>
>> _______________________________________________
>> etherlab-users mailing list
>> etherlab-users at etherlab.org
>> http://lists.etherlab.org/mailman/listinfo/etherlab-users
On 12.11.2014 12:53, Martin Troxler wrote:
> You can use the attached package as a starting point.
> 
> 
>         Clone / Update the required repositories
> 
>   * unpack tar (to etherlab-deb)
>     ||||
>   * clone (or pull-update) the Etherlab repository||
>     |hg clone| |http://hg.code.sf.net/p/etherlabmaster/code etherlab-master
>     <http://hg.ch10.ch.komax.org/Etherlab>|
>   * create the 'debian' subdirectory link
>     |cd etherlab-master|
>     |ln -s etherlab-deb/debian debian|
> 
> 
>         Build the debian package files
> 
>   * edit changes info
>     |debian/update-versionumber.sh|
>   * change/edit build rules if required
>     |gedit debian/rules|
>   * build
>     |debuild -b -us -uc|
>     |cd ..|
>   * The following files have been created:
>       o etherlab-devel_${Version}_${Arch}.build
>       o etherlab-devel_${Version}_${Arch}.changes
>       o etherlab-config-devel_${Version}_${Arch}.deb
>       o etherlab-modules-devel-dkms_${Version}_${Arch}.deb
>       o libetherlab-dev-devel_${Version}_${Arch}.deb
>       o libetherlab-devel_${Version}_${Arch}.deb
> 
>   * install package locally (use the just built .changes file}
>     |sudo debi etherlab-devel_????.changes|
> 
>   * |cd Etherlab|
>     |debuild clean|
> 
> 
> Regards
> Martin
> 
> Note:
> This e-mail is for the named person's use only. It may contain confidential and/or privileged information. If you have received this e-mail in error, please
> notify the sender immediately and delete the material from any system. Any unauthorized copying, disclosure, distribution or other use of this information by
> persons or entities other than the intended recipient is prohibited.
> Thank You.

Thanks a lot, that helps much!

Cheers,
Joachim